- Location
- Hainesville IL
The Greater Post Whore Society - Volume 4: What the Hell is Wrong with Jim?
- Thread starter Prime
- Start date
- Status
- Location
- Hainesville IL
we are still only 2 months out but my mortal kombat 11 hype is real.
- Location
- All over PA
Just a shame you’ll be playing it on a shiatty system.
- Location
- Hainesville IL
- Location
- Allen, Texas
No he wont. He has an Xbox, not a playstation.
- Location
- Allen, Texas
nice
- Location
- Denver Adjacent
Its OK. We can't all have nice things.
I got both my daughters their own bouquet of flowers. The wife and I don't celebrate Valentine's with each other.
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
Is it congratulations or condolences
Bushnut
First Fill-Up (of many)
- Location
- Fredericton NB, Canada
Same pay...more responsibility.?
Got a little bump in pay, may be able to buy the kids a happy meal like twice a year.
- Location
- Ontario Canada
Flying out to Edmonton for a medical conference next week. Good thing they are in somewhat in a deep freeze this time of year
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
Need to come just a bit more west
- Location
- Ontario Canada
But when work pays for it I don’t really have a choice. I would gladly go to the west coast. Either as a posting or for training
Bushnut
First Fill-Up (of many)
- Location
- Fredericton NB, Canada
Trade it in for an Audi?
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
Evening
- Location
- Denver Adjacent
Bourbon and Star Trek Voyager
- Location
- Denver Adjacent
So I've always enjoyed all of the Star Trek series that I've seen. I haven't watched any of Enterprise so I can't judge that. But the theme song of Voyager really resonates with me. Just that tone is happy for me.
- Location
- Hainesville IL
- Location
- Hainesville IL
going back to our MK 11 discussion earlier. she's still best girl, though.
- Location
- Ontario Canada
- Location
- Ontario Canada
Driveway is clean
- Location
- All over PA
Ugh. Not how I wanted to spend my day home. Dad and step mom went on cruise. He got notification that house is down to 48 degrees, so furnace isn’t working. So now I have to go to my dads to take a look and probably wait around for tech all damn day.
- Location
- Denver Adjacent
shiatty.
- Location
- Ontario Canada
Check the batteries in the thermostat before you call the tech
Check the hot surface ignitor if it has one and make sure it's not cracked.
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
Morning. Sitting at the airport waiting for my flight.
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
I will be stopping at a pick apart on my way home. What other Nissan vehicle have seats that fill fit the first gen Xterra
- Location
- Denver Adjacent
Anything will fit if you're clever enough.
But Frontier is the only direct bolt in that I know of.
- Location
- Ontario Canada
Is there a way I can replace the fuse that controlled the ABS in the IDPM to a fused switch to temporarily Gerry rig my truck while I wait for warmer weather to figure out the broken wheel speed sensor.
This year has seen some fairly heavy snowfall in my area and having to turn the truck off, switch into 4x4, get out and pull the ABS fuse from the IDPM, start the truck, replace ABS Fuse just to get my truck to shift into 4X4 is starting to get old.
I want to have a switch that will disable the ABS Fuse to speed up the procedure outlined above with out having to do any cutting of wires behind the IDPM
Is this possible. And if so what can I use to attach the wires to the IDPM ABS fuse location ?
This year has seen some fairly heavy snowfall in my area and having to turn the truck off, switch into 4x4, get out and pull the ABS fuse from the IDPM, start the truck, replace ABS Fuse just to get my truck to shift into 4X4 is starting to get old.
I want to have a switch that will disable the ABS Fuse to speed up the procedure outlined above with out having to do any cutting of wires behind the IDPM
Is this possible. And if so what can I use to attach the wires to the IDPM ABS fuse location ?
- Location
- Western Massachusetts
Providence, I am in you.
- Location
- Hainesville IL
coffee.... is in me
- Location
- Western Massachusetts
Who's coffee? Buhahaha, I got jokes.
- Location
- Western Massachusetts
Roger Williams Zoo today, AHL game tomorrow night.
The hotel we're in is waaay too fancy for my white trash ass.
The hotel we're in is waaay too fancy for my white trash ass.
- Status