SASXA
First Fill-Up (of many)
- Location
- Ormond Beach Florida
This is my build on The Unicorn, most of it's already done but I still got a lot to do before I have her where I want her.
Updated picture!
So far the list include:
Engine Bay Stock engine besides the baffle delete. Transmission and transfer case are stock. Not even a single exhaust mod.
Do have a 4 core radiator and a new transmission cooler coming in soon.
Front Dana 44, Chevy outers, Chromoly inner and outer axle shafts, Warn locking hubs, Ox cable locker.
Big brake kit
Rear Gm Corporate 14 Bolt, Stock axles, Welded, 5.38 Gears
Big brake kit.
Suspension Front, 12" Fox coilovers. Link Calmini kit. Rear, 63" chevy leaf springs, Zboxes and Revolver shackles.
Skid plates Calmini skid plate and stock gas tank skid till I can make one.
Interior Full clean interior no blemishes at all.
Exterior Custom front bumper with inset winch mount.
Rear bumper is a surprise.
Plans:
New tires and add a spare. (New tires purchased 4/22/13)
Make a spare tire carrier.
Possible exo cage with roll cage inside or just a full roll cage inside.
Upgrade front axle when a good deal comes by to a HP Dana 60.
Possible beadlocks but I don't air down far enough to need them. Not yet atleast.
Repaint the plastics sections and fix the fender whenever I find a wrecked X with the same color. (Took off most plastic and painted fender chalk board)
Get my Annabelle decal made for the windshield when I find the time to cut it. (Got a different sticker made)
Go wheel and have fun. (Haven't done this one enough yet)
That's about it with the build so far. Hoping I can get the build rolling on it soon. Pictures will be up when I get more from a friend. I don't have many pictures because I'm usually inside.
EDIT: Few videos I'm in partially at the local riding park Hardrock in Ocala, FL.
http://youtu.be/9-grve2RcYQ
http://www.youtube.com/watch?v=cZl4_F5ND8M&feature=plcp
Updated picture!
So far the list include:
Engine Bay Stock engine besides the baffle delete. Transmission and transfer case are stock. Not even a single exhaust mod.
Do have a 4 core radiator and a new transmission cooler coming in soon.
Front Dana 44, Chevy outers, Chromoly inner and outer axle shafts, Warn locking hubs, Ox cable locker.
Big brake kit
Rear Gm Corporate 14 Bolt, Stock axles, Welded, 5.38 Gears
Big brake kit.
Suspension Front, 12" Fox coilovers. Link Calmini kit. Rear, 63" chevy leaf springs, Zboxes and Revolver shackles.
Skid plates Calmini skid plate and stock gas tank skid till I can make one.
Interior Full clean interior no blemishes at all.
Exterior Custom front bumper with inset winch mount.
Rear bumper is a surprise.
Plans:
New tires and add a spare. (New tires purchased 4/22/13)
Make a spare tire carrier.
Possible exo cage with roll cage inside or just a full roll cage inside.
Upgrade front axle when a good deal comes by to a HP Dana 60.
Possible beadlocks but I don't air down far enough to need them. Not yet atleast.
Repaint the plastics sections and fix the fender whenever I find a wrecked X with the same color. (Took off most plastic and painted fender chalk board)
Get my Annabelle decal made for the windshield when I find the time to cut it. (Got a different sticker made)
Go wheel and have fun. (Haven't done this one enough yet)
That's about it with the build so far. Hoping I can get the build rolling on it soon. Pictures will be up when I get more from a friend. I don't have many pictures because I'm usually inside.
EDIT: Few videos I'm in partially at the local riding park Hardrock in Ocala, FL.
http://youtu.be/9-grve2RcYQ
http://www.youtube.com/watch?v=cZl4_F5ND8M&feature=plcp
Last edited: