Group buy is CLOSED! Thank you to all who ordered. We had a very strong response. Between locals and forum members have made over 20 pairs of sliders and numerous process and product improvements.
With each new product we will be partnering with XterraNation.org to offer a pre-release group buy. This starts now with a traditional product that every trail truck needs: Rock sliders. We want everyone to have the opportunity to start their armor collection while theirtruck is still pretty. And we believe you shouldn’t have to drop a paycheck, (or two) on this protection. We will offer our rock sliders in 3 styles. Every set uses 5/16" or greater steel plate flanges, gusseted support tubes, 2â€x2†3/16†wall square tube rub rails and class 10.9 (grade 8 equivalent) mounting hardware or greater. Tubing is 1.75†.120 wall round tube.
UPDATE: 1st & 2nd gen Xterra & Frontier sliders now come with a universal mounting bracket that will allow 1 product to fit standard body (no body lift) & 2" body lifted trucks. No need to buy new sliders, no need to modify.
We are offering these for standard and 2†body lifted 1st Gen Xterra 2nd Gen Frontier Crew Cab & Xterra These sliders will come in unfinished steel. We recommend a finish of spray on bed liner prior to installation. If we powder coated these you would rub it off and have to paint over it down the line anyway. We pass the savings on to you. We do have finishing options available at an additional cost if you would like them to arrived finished ready to bolt on. Paint, bedlining or powder coating is available for an additional charge. We are asking for a 50% deposit up front to hold your spot and 50% upon shipment. We are going to run this through the end of the year but orders will ship as they are completed. Feel free to contact me at Mac@EngineeringPP.com Basic .
.
Standard .
Advanced
.
.
.
with Kickout on 2" Body lift with 33's
Type III/Advanced on no body lift
Bolt on Tube Fender option
1st Gen - Universal Mounting Bracket
Our introductory group buy pricing is good through Friday April 14. This is the date we anticipate being caught up and ready to ship all current orders.
Until we get our web store built we are accepting Paypal, check or money order.
Our Paypal address is paypal@engineeringpp.com
If you pay with Paypal in the memo section we need to know the following:
Gen 1 or 2
Xterra or frontier
If gen2 body lift or no.
Style (basic, standard, advanced)
Finish - bare, bedliner $35, powdercoat (color) $60
If it's 1st gen we redesigned our bracket so it will work with factory body or a 2" body lift.
If you don't want to use paypay we can send you an address to mail a check or money order and we'll need the same info about your truck.
Please Let me know if you have any other questions.
With each new product we will be partnering with XterraNation.org to offer a pre-release group buy. This starts now with a traditional product that every trail truck needs: Rock sliders. We want everyone to have the opportunity to start their armor collection while theirtruck is still pretty. And we believe you shouldn’t have to drop a paycheck, (or two) on this protection. We will offer our rock sliders in 3 styles. Every set uses 5/16" or greater steel plate flanges, gusseted support tubes, 2â€x2†3/16†wall square tube rub rails and class 10.9 (grade 8 equivalent) mounting hardware or greater. Tubing is 1.75†.120 wall round tube.
UPDATE: 1st & 2nd gen Xterra & Frontier sliders now come with a universal mounting bracket that will allow 1 product to fit standard body (no body lift) & 2" body lifted trucks. No need to buy new sliders, no need to modify.
We are offering these for standard and 2†body lifted 1st Gen Xterra 2nd Gen Frontier Crew Cab & Xterra These sliders will come in unfinished steel. We recommend a finish of spray on bed liner prior to installation. If we powder coated these you would rub it off and have to paint over it down the line anyway. We pass the savings on to you. We do have finishing options available at an additional cost if you would like them to arrived finished ready to bolt on. Paint, bedlining or powder coating is available for an additional charge. We are asking for a 50% deposit up front to hold your spot and 50% upon shipment. We are going to run this through the end of the year but orders will ship as they are completed. Feel free to contact me at Mac@EngineeringPP.com Basic .
Standard .
Advanced
with Kickout on 2" Body lift with 33's
Type III/Advanced on no body lift
Bolt on Tube Fender option
1st Gen - Universal Mounting Bracket
Our introductory group buy pricing is good through Friday April 14. This is the date we anticipate being caught up and ready to ship all current orders.
Until we get our web store built we are accepting Paypal, check or money order.
Our Paypal address is paypal@engineeringpp.com
If you pay with Paypal in the memo section we need to know the following:
Gen 1 or 2
Xterra or frontier
If gen2 body lift or no.
Style (basic, standard, advanced)
Finish - bare, bedliner $35, powdercoat (color) $60
If it's 1st gen we redesigned our bracket so it will work with factory body or a 2" body lift.
If you don't want to use paypay we can send you an address to mail a check or money order and we'll need the same info about your truck.
Please Let me know if you have any other questions.
Last edited: