New Center Console
- Thread starter Diadaga
- Start date
- Location
- SW OK & formerly Eastern NM
I'm not sure EXACTLY what measurements you're looking for but from the drivers seat front bolt to back bolt is approximately 17" and from the low point of the console near the rear bolt to the top of the console is approximately 15 1/2". These are by no means perfect measurements but it's a starting point. The console actually raises up as it moves forward too. I think we need more information as to how much console is being replaced. I can do a better job when I'm home from work.
- Location
- SW OK & formerly Eastern NM
Wow. That's confusing to me. We need to do some pics with the dimensions drawn out to make sure nothing gets lost in translation. I'll pull mine in the garage tonight and do that if no one beats me to it.
- Location
- SW OK & formerly Eastern NM
Which X is it. What's his name and I'll pull that up tonight too.
- Location
- Pearl, MS
I was just thinking, if you are making a custom center console, why not implement a hide-away gun compartment? Just a thought.
I was thinking that too.
- Location
- SW OK & formerly Eastern NM
It's fate! That would be sweet to implement into it.
- Location
- Pearl, MS
Imagine a section of the side of the center console tilting out about 6" at the top, just enough for you to fit your hand and a gun in its holster in there. Of course, at an angle that does not make it awkward to reach for.
Mac here is the link
www.expeditionportal.com/forum/threads/5000-eXpeditionXterra-Build-Up
The combination I'm looking at can be set up to have a lockable box in the center
www.expeditionportal.com/forum/threads/5000-eXpeditionXterra-Build-Up
The combination I'm looking at can be set up to have a lockable box in the center
Last edited:
- Location
- SW OK & formerly Eastern NM
This is very involved so I would definitely get some better measurements if you're wanting to get this much work done. I can give you some rough numbers but I can't tell if this guy actually had the manufacturer there helping him or not.
Here are my crappy measurements after seeing those pics lol.
Here are my crappy measurements after seeing those pics lol.
- Location
- Murray, UT
Here you got check this out! http://www.thenewx.org/forum/showthread.php?t=20414 <= one of my friend's SAMI nice guy, put this in his X it's called a Jotto console. See pics on page 5! But I do recommend reading through all the pages, it's worth researching!
- Location
- Smyrna, TN
Those consoles are primarily found in police/fire/EMS vehicles to store all the different radios, siren boxes, and light boxes. I've used the Jotto before SEVERAL times in the last 8 years and I HIGHLY recommend them. They take abuse extremely well and provide lots of storage options.
Good work kuma I knew I had seen someone do it just couldnt remember where
Sent from the Nighthog mobile command unit.
- Location
- SW OK & formerly Eastern NM
Ok. Those measurements are JUST the console. It leaves the space for the back seat floor.
- Location
- Conroe, TX
Man I have always loved that eXpeditionXterra and wanted that center console setup.