LED Group Buy - Closed - Check Here For Updates"

[TN4x4Xterra]

Look just like totrons. Quite a deal

Ditto

Sent from Avalanche Tactical Response Command.

 

[Prime]

Action Shots. Tally updated in 1st Post.

Also of note. These are combination beam units. Flood/spot.

 

[yellowx16]

how long will this GB be open until?

 

[Prime]

I'm going to leave it open until the end of April at this point. Once it's closed I'll get ahold of everybody who wants one and get all the details together.

 

[Timrich]

I could probably do one.

Sent from my Galaxy S III

 

[Jack Stilts]

I can't tell from the pictures...they have a white lens, right? Some of them look yellow.

 

[Prime]

The lens is clear and the light is all 6000k white. The only yellow you could be seeing is my crap phone camera.

 

[Jack Stilts]

The lens is clear and the light is all 6000k white. The only yellow you could be seeing is my crap phone camera.

That's what I figured. It's weird, though - on the site the bulbs inside look yellow.

Anyway, put me down for one.

 

[Prime]

In the off position the diodes themselves are very yellow. But the light is as white as it could be

 

[xterror04]

I read through and didn't see anything what did the size measure out to be? I'm assuming the lens is 6"

 

[Prime]

Sorry about that.

Lens is 6"
Housing is 7 1/4"
Mounting points: 7 1/4" or 9 1/4" depending on how you mount the ears.

Updated in first post.

 

[yellowx16]

do you have the tech specs, like amp draw, lumen output etc.?

 

[Prime]

Copied and pasted from the manufacturers spec sheet.

. LED Power: 36W
. Raw Lumen:2640lm
. Operating Voltage: 10-30 DC
. Waterproof rate: IP 67
. 12pcs*3w CREE LEDS
. Body Color: Black,White
. Color Temperature: 6000K
. Material: Diecast aluminum housing
. Lens materiallex
. Mounting Bracket: Alu firm bracket
. Beam pattern: Combo
Flood(60 degree)
Spot (12 degree)
. Dimensions:7.5 inch

This is all the info I have. Updated first post to include.

 

[CrazySteve911]

So were waiting until the end of April to get in the order?

If so I may be down for 5, if not 4.

 

[NMTerras]

I'm in for up to four, but need to know some more details, the most important of which is when...

 

[Prime]

If I close the GB at the end of April and get everything ordered shortly thereafter, we'd be looking at sometime in them middle-end of May for delivery to you.

 

[BigTim55]

I may be in for 4. These would look good on my xoskel lopro light bar.

Sent from Xavier's School for Gifted Youngsters

 

[NMTerras]

If I close the GB at the end of April and get everything ordered shortly thereafter, we'd be looking at sometime in them middle-end of May for delivery to you.

Possibly unfortunate timing, as goneMOAB is May 19-24. Not that I need them for gone, I don't, just sketchy having stuff delivered when I'm out of town. But whatever, count me in for four.

 

[CrazySteve911]

How about we close it in 2 weeks? Gives plenty of time for anyone who has interest in the GB to post something, and we order by say the 26th. Should be there before Terra leaves and we all get the lights sooner.


Everyones happier.

 

[NMTerras]

That's great for me, but if you need to keep it open longer by all means do...only one of the four I'm getting is going on Terra (backup light), the other three are going on the Chef

 

[Jack Stilts]

I may be in for 4. These would look good on my xoskel lopro light bar.

Check the measurements of the actual light dimensions vs. the light bar before you commit. You might only be able to fit two.

 

[Prime]

I did a test fit on the B&M bar that I have. You can fit two of these using the standard hole spacing that the bar comes with if you mount the tabs facing inward under the body of the light.

 

[Prime]

Just a thought.....since I've got 20 pcs of the 7" bar and that meets the quantity requirement, would there be any interest in going for a 20 count of the square ones in a flood light or driving light configuration? I'll have to get to the manufacturer and square up the pricing but I thought that might be someone that ores would be interested in.

NEW 16W HML-1212
. LED Power: 16W . Raw Lumen:1440lm
. Operating Voltage: 10-30V DC
. Waterproof rate: IP 67
. 4pcs*4w high intensity CREE LED
. Current draw:1.34 @
12V,0.67A@24V
. Color Temperature: 6000K
. Material: Diecast aluminum housing
. Lens materialc
. Mounting Bracket: Stainless Steel
. Opitonal Beam: Flood beam pattern(90 degree)
Spot beam pattern(8 degree)

I think the price on these would be down in the $40 range. But don't quote me until I hear from the manufacturer.

 

[NismoFire]

Ooooooohhhh I'd personally rather have the square ones than the other...

 

[Prime]

Don't go messing with my numbers! Heh. Let me get word back from the manufacturer and then we'll talk.

 

[NismoFire]

I know, I know....I suck. Sowwy.

 

[Xterraforce]

Depending on pricing I'd be in for two or four of the square ones with flood pattern.

 

[dhyde79]

Feeler: LED Light Bars

I'd be interested in a pair...maybe 4...have to wait till the in laws get back from HI...of the longer ones that is...not the squares...

 

[NMTerras]

OK so bad news, I went out and checked and these will not fit as i had intended to use them. I need lights with single foot mounts...so...sorry, I'm out

 

[NMTerras]

OK so bad news, I went out and checked and these will not fit as i had intended to use them. I need lights with single foot mounts...so...sorry, I'm out

I should have read the above posts...so I'm out on the 7" lights, but I'm in on the squares, depending on price. 4 floods, 2 spots

 

[dhyde79]

If I close the GB at the end of April and get everything ordered shortly thereafter, we'd be looking at sometime in them middle-end of May for delivery to you.

why not leave it open, and just order as you can?

 

[Prime]

I have no problem leaving it open, its just that I can only order multiples of 20. So it would have to be a time cutoff somewhere that I can get the order in and move on to more. That may be the way this ends up working. I'm waiting to hear back from the manufacturer now on a few things, so if I've got 20 committed orders, I might be able to go ahead and process them and get em out to you guys.

NMTerras, completely understand. Stay tuned for details on the squares w/ the single post mount.

BTW, here's some install teasers:

 

[Macland]

The only problem with processing early is the chance that you won't get another 20 orders and someone gets left out. I think your og time frame would be best. I'm not buying but speaking from a neutral standing.

 

[drbandkgb]

I have a issue with leaving this open.. I do not mind group buys but this can not turn into a open deal. I have sponsors that pay to sorta have 1st shot on the forum..

I happy to see deal like this on here..
They just can't stay with out someone becoming a sponsor.

 

[Prime]

Understood Dave. So. As it stands, this is done at the end of April. If it blows up, Dave and I will talk.

 

[drbandkgb]

Understood Dave. So. As it stands, this is done at the end of April. If it blows up, Dave and I will talk.

It's all good man..

If this turns into more just let me know..

I may need to buy one or two more for the nxm raffle

 

[Prime]

If this turns into more, I'll give you a few for the raffle.

 

[yellowx16]

hey guys sorry but I'm gonna have to pull out of the GB. I got maintenance Issues that keep popping up every day, so it looks like I'm gonna have to wait on lights.

 

[SAKS]

Id be in for 2

 

[Prime]

Okay. I got the pricing back on the square ones. We're looking at $55 each shipped to you, and $5 less for multiples. Basically half of they run normally.

I can make a list of who wants floods and spots, however remember we need 20 of each to make the order. I'm leaning towards the floods for myself, but I'll make both lists and see what happens. Check the updates in the first post.

Those who noted interest above please confirm now if you would like.

This will be it as far as changes. From here on out I just need a count of who wants what. Hopefully we can all get everything.

Thanks.