InSainFab
Bought an X
- Location
- Thornton CO
Starts 2/1/15 and orders will continue to be taken until 2/15/15. You will have up until 3/15/15 to make your payment in order to get everything out before GoneMoab2015.
Prices that are in BOLD below represent the current discount tier that product has reached.
Prices that are in BOLD below represent the current discount tier that product has reached.
~Orders DO NOT Include Shipping
~DEDUCT $70 for RAW/BARE
~Add $40 to add 4 Gal or 2+2 Gal Rotopax Brackets on Rear Tire Carrier (Does not include Rotopax or Rotopax Mounts)
~Add 22" bar in front plate bumper ADD $135
~Add a set 3" or 4" Pods for Fog Lights in the front bumper, including lights ADD $75
~Add QUAD 3" lights to the front bumper for $140
~Add a low amp single or double harness $20
~Add Factory Fog Light Holes $100
~Add flush mount HOLES ONLY to Rear Corners ADD $40
~Add flush mount holes including lights ADD $80
CONFIRMED List (Products will ship in this order):
$$: Rear Bumper, Standard Sliders (RAW)
$$: Rear Bumper w/ Rotopax Brackets
$$: Rear Bumper (RAW)
$$: Rear Bumper w/ Rotopax Brackets
$$: Standard Sliders (RAW)
$$: Standard Sliders (RAW)
$$: Front Plate Bumper w/ Hoops and Quad Fog Lights and Red Shock Skids
$$: Rear Bumper w/ Rotopax Brackets & Rear Corners
$$: Rear Bumper w/ Rotopax Brackets
$$: Front Tube/Diamond Plate Bumper w/ 4" LED's, Rear Bumper & Rear Corners
$$: Front Plate Bumper, Factory Fog Holes, Headlight/Grille Hoops, 22" Flood LED (Add Flood Reflectors to make bar 100% Flood) Need to Add KC Covers
$$: Rear Bumper and Red Shock Skids
$$: Rear Bumper w/ RotoPax Brackets and Red Shock Skids
$$: Rear Bumper w/ RotoPax Brackets (RAW)
$$: Rear Bumper, Rear Corners
$$: Rear Bumper w/ Rotopax Brackets
$$: Rear Bumper w/ Rotopax Brackets
$$: Rear Bumper and Black Shock Skids
$$: Rear Bumper
$$: Sliders (RAW)
$$: Rear Bumper w/ Rotopax Brackets (2-2gal.), Front Slotted Bar
$$ Rear Bumper w/ Rotopax Brackets (RAW)
$$: Rear Corners and Black Shock Skids
$$: Sliders
$$: Rear Bumper NO Carrier
$$: Front Plate Bumper w/ Single Spot Lights (RAW)
$$: Sliders (RAW)
$$:Rear Corners (RAW)
$$: Front Plate Bumper w/ 22" Bar and Quad 3" Lights, Rear Bumper w/ Rotopax Brackets (RAW)
$$: Rear Bumper w/ Rotopax Brackets and Red Shock Skids
$$: Rear Corners
$$: Front Plate Bumper w/ 22" Bar and Quad 3" Lights
$$ Jason Wellman: 1st Gen Rear Bumper
$$ J Everett: Front Plate Bumper w/ Holes for 22" LED, 3" Fogs and Factory Fogs (RAW)
$$: Front Plate w/ Quad Lights and Rear Bumper w/ Rotopax Brackets
$$: Rear Carrier w/ Rotopax Brackets
$$ 02Xterra: 1st Gen Rear Carrier
$$ Firefighter4607: 1st Gen Sliders (RAW)
$$: Rear Corners
$$: Rear Bumper w/ Carrier, Rear Corners w/ Lights and Sliders
$$ Trexterra: Front Tube/Diamond Plate w/4" Fogs
$$ kaytiejean05: Rear Bumper w/ Carrier
: Rear Bumper w/ Rotopax Brackets and Rear Corners payment info sent
Mike Nichols: Rear Corners w/ Flush Mounts payment info sent
: Rear Bumper w/Rotopax Brackets payment info sent
Reshmax00: 1st Gen Rear Bumper (RAW) payment info sent
: Rear Bumper w/ Rotopax Brackets payment info sent
: Rear Bumper w/ Rotopax Brackets payment info sent
: Front Plate Bumper/No Hoops w/ Quad 3" Lights, Rear Carrier w/ Rotopax Brackets, Rear AL Corners w/ Lights payment info sent
Fixitguy: Front Plate Bumper w/ Factory Fog Holes, 22" Light Bar w/ 2 Lamp harness and Rear Carrier w/ Rotopax Bracket payment info sent
mudchet: Rear Bumper payment info sent
schmidt1894: 1st Gen 40" Light Mounts payment info sent
: Rear Carrier w/ Brackets payment info sent
cgregg: Front Plate Bumper w/ Factory Fogs and 22" Light Bar payment info sent
Gentsjack7: 1st Gen Rear Bumper payment info sent
DC xterra: 1st Gen Rear Bumper w/ Rotopax Brackets and 40" Light Mount payment info sent
: Rear bumper w/ Rotopax payment info sent
SpongeX: Rear bumper w/ Rotopax (2 CB Tabs) payment info sent
Boogieman: 1st Gen Rear Bumper payment info sent
Possum4757: 40" Light Mounts payment info sent
: Front Plate Bumper w/ 3" Holes payment info sent
: Rear Carrier and Black Shock Skids payment info sent
: Front Plate w/ Quad 3" and 22" Light Bar, Rear Carrier w/ Rotopax Brackets and Red Shock Skids payment info sent
: Rear Corners payment info sent
Malin_Rebate: 1st Gen 40" Light Mounts payment info sent
: Sliders payment info sent
________________________________________________________________
GB DETAILS:
GB DETAILS:
- Starts 2/1/15 and orders will continue to be taken until 2/15/15. You will have up until 3/15/15 to make your payment in order to get everything out before GoneMoab2015.
- Payment: Once opened you will receive an Invoice for your confirmed order. We accept CC and Paypal for an extra 3% and Chase QuickPay is free. If you want to send a check, that's fine too, but your shipment would be delayed until funds clear.
- 100% of your order total will be due upon receipt of your invoice. However, you will have up until 3/15/15 at midnight MST to pay in full. This is due to fairly normal lead times (meaning you're not waiting 6+ months like GB's in the past) and it can add a lot of issues on our end with deposits and extra payments when ready to ship.
- We are offering a tiered discount structure for each item. The more orders, the better the discount. Please understand that companies that are able to cut their prices in HALF for Black Friday as an example can sometimes mean that they are killing it with a high profit margin the rest of the year. That is not the case with InSain. These prices were made with bulk materials orders in mind, long hours and a lot of volunteered shipping help.
- CONFIRMED LIST: is for people that are 100% IN; funds available, set on ordering as we are using this for the tiered discount. In other words, NO BACKING OUT!
- CONFIRMED List for AL Corners at $550 shipped: is for people that are 100% IN; funds available, set on ordering IF the price reaches the $550 shipped tier.
- If you are one of the first ones to order and we reach a better discount tier come close, every one will be refunded the appropriate amount for the tier discount that product reaches. I.E. if you are the 1st to order a rear bumper and pay $700 but by the time the GB closes on 3/15 there are 10+ orders, you will receive a refund for the discount difference.
- Shipping will be calculated and will be sent in a separate invoice. The rear bumpers should be less than $100 shipped to the CONUS as they just shipped one to FL for $95. Items will be shipped to individuals in order of the confirmed list and as ready.
- CAN Orders will come with a Declaration of Origin in order to help facilitate the import process on your end.
- If you order RAW; product will be less expensive, shipping will be less expensive and you will have faster lead times.
- We would like to have 100% of the powder coated items shipped by 4/5/15 depending on confirmed list, but our goal is to have 100% of them to you, with enough time to install before GoneMoab2015!
____________________________________________________________________________________________
AVAILABLE PRODUCTS
~All products can come RAW or Powder Coated and all aftermarket light bars are from ExtremeLEDLightBars.com~
~All products can come RAW or Powder Coated and all aftermarket light bars are from ExtremeLEDLightBars.com~
- Front Plate Bumper (Custom Options: Integrated 22" Light Bar, 3" and 4" Fog Light Replacement) Pictures coming end of week 1/12/14
~2 Recovery Points
~Winch Cradle
~Factory Fog Light Holes
~Headlight/Grille Hoops
~1/8" Radiator Skid
- Front Prerunner Tube
~2 Recovery Points
~1/8" Radiator Skid
~Flat Plate Covered Corners
- Front Tube w/ Diamond/Flat Plate Front Bumper (Custom Options: Integrated 22" Light Bar, 3" and 4" Fog Light Replacement)
~2 Recovery Points
~Winch Cradle
~Factory Fog Light Holes
~1/8" Radiator Skid
- Rear Tire Carrier (Custom Options: RotoPax Brackets)
~2" Receiver
~Hi Lift Mount
~CB antenna
~2-Recovery Points
~License Plate Bracket
~None, 1" and 2" Body Lift Compatible
~up to 35" Tire
4 Gal. ROTOPAX Brackets (Optional):
- Front Slotted Light Bar
- Front 40" Light Bar Mounts
- Sliders
~1/8" 2x2 square
~ .120 wall tubing.
~ 1/8" tread plate step
- Rear Light Bar
- Rear AL Corners (Custom Option: 4" Flush Mount Pods)
~1/8" or 11 Gauge Steel is 5.0lb/sf.
~3/16" or 7 Gauge Steel is 7.66lb/sf.
~1/4" or 3 Gauge Steel is 10.21lb/sf.
~Corey uses 3/16" 5052 Grade Aluminum to build the corners at 2.7lb/sf.
Last edited: