Camber bolts 2011 P4X

M

Maxxpags

Bought an X
Tried to search the subject but only got member build lists. I really don’t have much time for research due to the fact that I need new tires & in the blink of an eye cold weather will be coming. 2011 Pro 4X, installed an Ironman 3” lift with new coil overs & heavy duty leaf packs. Definitely need adjustable camber bolts. I’ve read that they are prone to be frozen & LCA’s might need to be cut off but I’m going to try just the camber bolts 1st but either way… what are the best brands? I like the “All Dogs” with the eccentric washers on both ends/ others I’ve seen only have one washer. What have you people used? What works? I’m sure I’ll end up with new LCA’s with adjustable camber bolts in the end. Thank you for your input
 
IM1RU

IM1RU

Skid Plates
Supporting Member
Location
SLC, UT
All Dogs are just fine. Just pull the trigger.....

And if you have never removed the stock bolts , I 100% guarantee you will be cutting them off. By OEM Nissan LCA's. You can search Nissan Parts online, there are a couple of options..... My friend just bought Titan lCAs for $140 each.
 
Zack.

Zack.

Has been dubbed Arnold
Supporting Member
Location
Livermore, CA
If you’re outside of the rust belt don’t give up hope on getting the bolts out. Either way, def go OEM camber bolts, unless you are doing the all dogs lockout style. All the aftermarket camber bolts use a flat side instead of a groove, reducing the strength - which can lead to deformation or breaking.
 
M

Maxxpags

Bought an X
Thanks, ya I’ve been hitting everything with PB Blaster all week with the hope I might be able to get them out. PB Blaster is really good stuff but not sure it’s that good… we’ll see come Saturday
 
M

Maxxpags

Bought an X
New lower control arms & the adjustable cam bolts installed, both from Z1 Off-road. Brand new 265/75-16 BFG A/T’s(same as I have on there now), & front end alignment all scheduled for this Saturday. Is there specific alignment settings with the 3” lift, &/or with the adjustable camber bolts? The place I’m taking it to does have experience with lifted truck’s but was just wondering? Tanx, M
 
You must log in or register to reply here.
Top