Branch Cables

Bedard51 Feb 27, 2017

  1. Bedard51

    Bedard51 Test Drive

    Messages:
    2
    Location:
    Hinsdale NH
    Limb Risers

    Does anyone on here have the cables that go from your roof to your front bumper or hood? If so how did you do it? What items will I need and what problems could I run into? Thanks in advanced
     
    Last edited: Feb 27, 2017
  2. thecoalition

    thecoalition Call me Daddy Super Moderator

    Messages:
    6,182
    Location:
    Richmond, Va
    There is someone who has them, but idk if they are on this board. IIRC, they hooked the cable to their aftermarket bumper which had light guards and then brought them to the roof rack.
     
  3. Cptpackrat

    Cptpackrat Need Bigger Tires Supporting Member

    Messages:
    634
    Location:
    Gillette WY
    So there are a couple ways to do them, one is as stated above. Attack them to the headlight guards on an aftermarket bumper. The other way is to make a bracket that goes in the body gap between the hood and fender. I actually am working on a prototype behind the scenes of everything else to do it this way while being able to remove the cables for daily driven.
     
  4. cpalka9

    cpalka9 Bought an X Supporting Member

    Messages:
    118
    Location:
    Ocala, FL
    There are a few people on here that have done it. I think someone used cb antenna mounts to attach one end to the hood


    Sent from my iPhone using Tapatalk
     
  5. Muadeeb

    Muadeeb Bastard Admin from Hell Admin

    Messages:
    14,898
    Location:
    Dallas
  6. granitex

    granitex Skid Plates Lifetime Member Founding Member

    Messages:
    1,353
    Location:
    Columbus OH
    you do need o remember to put a spring on each side, or the body movement in relation to the frame will do some ugly work on all of it
     
  7. harryron

    harryron Suspension Lift Supporting Member

    Messages:
    2,641
    Location:
    ohio
    I hate to say this but a lot of the land rover people run these you may try looking on some of their forums for info.

    sent from the middle of a corn field.
     
  8. J Everett

    J Everett Suspension Lift Supporting Member Founding Member

    Messages:
    2,601
    Location:
    Houma, LA
    Do a search for "limb riser" either on forums or on Google in general and you'll get a lot more results and probably find lots of ways to do this project. As harryron said, this is a very common mod among the Land Rover crowd, so maybe check out those forums, and also check out Expedition Portal.
     

Share This Page