AzhiAZiaM Build
- Thread starter AZhiAZiAM
- Start date
finishing up a couple projects i've had laying around. did my cb and my license plate finally came in.
Midland 1001z (dave mod)
4' Firestik
stupid drill slipped when i was drilling so its a little cock eye and i'm not that much of a perfectionism so idgaf
Midland 1001z (dave mod)
4' Firestik
stupid drill slipped when i was drilling so its a little cock eye and i'm not that much of a perfectionism so idgaf
Last edited:
- Location
- Smyrna, TN
Meow.
- Location
- Central FL
The CB turned out great! If I were you I'd go all out and mount the plate crooked so it looks like you meant to do it! LOL
oh i'm leaving it lol. and thanks for the input about the cb to. didn't want to cut up without knowing!
- Location
- Central FL
No problem!
- Location
- Probably in class..
I like the Crooked plate..
ty sir.
figured id throw some mud pic it so everyone doesn't think its a pavement princess. she's more of my travel rig though, dunes and traveling. hard to take action pics by yourself.
she takes me places, week trip around norcal with a buddy from chitown. he'd never been so figured we go and have some fun
sc mystery spot
golden gate
she takes me places, week trip around norcal with a buddy from chitown. he'd never been so figured we go and have some fun
sc mystery spot
golden gate
for those who haven't been to the mystery spot. its a gravitational anomaly weird pulls and such. flat surfaces that don't look or feel flat at all.
completely level surface but when you hang it makes it feel like your falling down a cliff.
have more but photobucket just took a poop.
completely level surface but when you hang it makes it feel like your falling down a cliff.
have more but photobucket just took a poop.
BigTim55
Banned
- Location
- San Antonio
i really like your truck. i wanted a red X. this is one of my favorite 1st gens ive seen
- Location
- Idaho!
So when in the gravitational anomaly, did you close your eyes and spill around as fast as you can and then open them? I'd love to see someone try that. I have no concept of the place you are talking about, but it sounds fun.
MORE dirty X pics- that's what this thread needs!
MORE dirty X pics- that's what this thread needs!
- Location
- Hainesville IL
i love that golden gate pic. ive been at that spot before over looking it.
- Location
- Bowling Green, KY
So since you are paid you have set hours at a station so you dont ever respond in your POV? I didnt see lights or anything on your X so I was wondering. Trying to figure out what I want to run once my probationary period is up.
- Location
- Smyrna, TN
I'll answer this for him...
He's a career fireman, which means he doesn't respond POV, therefore no POV lights.
ty and yes scheduled times aaron 3on 4 off.
worked a long stint between fire and helped my boss open up a new restaurant. so my dog and i decided to take a day trip for my only day off for the next week or so.
little fun at fill the boot for MDA raised just under 10k
showing some xn love at the beach. went around and smash on the dunes for a little to take some aggression out.
my fat pooch.
30 degrees cooler and only 2 hours away might as well for the day.
little fun at fill the boot for MDA raised just under 10k
showing some xn love at the beach. went around and smash on the dunes for a little to take some aggression out.
my fat pooch.
30 degrees cooler and only 2 hours away might as well for the day.
BigTim55
Banned
- Location
- San Antonio
I love Pismo.
Sent from my SGH-M919 using Tapatalk 2
Sent from my SGH-M919 using Tapatalk 2
as do i, its my home away from home, i grew up there.
xterratsp4
Bought an X
- Location
- Rohnert Park, CA
The X is looking good!
so guys for those of you that don't know long story short, i got the x back, changed the valve cover gasket today (passenger) and i still have a small leak from anyone. little darker than normal. anyone have ideas? couldn't find where it was coming from before it got dark on me.
- Location
- Hainesville IL
idea one- vavle cover was removed while still hot/warm and warped
idea two- gasket was shifted during install
idea three- valve cover was not properly torqued or not tightened down in the recommended pattern (center bolts to outside bolts) but thats something normally used on the cylinder heads mostly, but the same maybe needed for valve covers.
these are just some generic diagnostic theories.
guess i need to relook into it. its not leaking as bad as it was before but when i came home this weekend. after an hour drive i could smell a little burn off oil. thanks jim
Ah, the elusive G Sensor. Let me know when you find it. I've been told it doesn't exist on my vehicle.
Sent via wild ferrets on crack
lol well i'm not going to worry about it because i'm just going to rip out my ABS anyways when time comes to it. but i was told it was under the dash.
BigTim55
Banned
- Location
- San Antonio
bro i think me and you are the only ones who think that!! everyone else has said black. wonder if i can mix red/ black together lol
- Location
- Denver Adjacent
You can do red sliders...that'd look good. But if you want to blend them, it kinda depends on design.
WHICH WE CAN'T HELP YOU DECIDE BECAUSE YOU HAVEN'T POSTED PICTURES OF THEM!
/hehe
- Location
- Probably in class..
I think you should accent them with red, a little will go a long way
Sent from space and stuff
Sent from space and stuff
- Location
- South Park, CO
Something says.... red to me.
Xterrafauss
Suspension Lift
- Location
- Jacksonville Florida
BigTim55
Banned
- Location
- San Antonio
- Location
- Hainesville IL
red.
- Location
- Smyrna, TN
I'm gonna be the black sheep and go with...well...black.
Maybe I'm just biased..
Maybe I'm just biased..