XterraNation

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What have you done for your X?

reaver

Lockers Installed
Supporting Member
I've got something that's draining my starter battery. Now the fun of figuring out what it is...
 

MisterH

Bought an X
I figured out my throttle issue with my '03. Early this year, the shop did a lot of work on it. Never idle right afterward. Acceleration cable might be worn. Every person disagreed with me and stated something else. Today, I worked on it and put my hand on the cables near the firewall. It quieted down, so I zip-tied them down. However, tonight, a headlight burned out. I can not get a victory for a day with it, lol!
 

Attachments

  • IMG_7716.jpeg
    IMG_7716.jpeg
    2.3 MB · Views: 1
  • IMG_7715.jpeg
    IMG_7715.jpeg
    2.6 MB · Views: 1

Prime

Shut up Baby, I know it!
Admin
I figured out my throttle issue with my '03. Early this year, the shop did a lot of work on it. Never idle right afterward. Acceleration cable might be worn. Every person disagreed with me and stated something else. Today, I worked on it and put my hand on the cables near the firewall. It quieted down, so I zip-tied them down. However, tonight, a headlight burned out. I can not get a victory for a day with it, lol!
Old shiat is old. We gotta do the best we can.
 

TerryD

Total Tease
Supporting Member
Did a PMF on my trans yesterday and pulled the trans skid. Also rotated the tires.

The fluid was pretty bad looking after only 18k. I'm gonna have to remake the trans skid with some room to let the hot air out underneath.
 

Subsport

First Fill-Up (of many)
Supporting Member
Lift all done. Radflo coilovers, SPC UCAs, new LCAs, refurbished spindles, new hubs, all new hardware, painted frame, etc. I’m done … at least until next weekend :)

IMG_3705.jpeg
 

reaver

Lockers Installed
Supporting Member
I've gotta drop mine off at the mechanic tomorrow. Something is draining my battery overnight. My auxiliary battery charging is disabled. I suspect the ignition switch is the culprit, but I don't have time to try and track it down right now, so off to the shop it goes.
 

Brunnie

Bumpers Installed
Supporting Member
Used about 1/4 of a bottle of Goo Gone to get rid of the duct tape residue, and then $15 at the car wash to clean everything and make Tonka shiny again.
 

reaver

Lockers Installed
Supporting Member
Well, heard back from the shop. Turns out the inside of my positive battery terminal was corroded, causing a bad connection. This led to all my issues. They're swapping it out, and cut half the cost of the diagnostic fee off.

Getting it fixed for the cost of the diagnostic fee.

Winning!
 

BEEFY

I Smile when Gasoline Can Freeze
Put a motor mount back in the xterra last night and started working on the steering. Pulled the pitman arm and found that at some point I twisted the output shaft on the FJ80 steering box that I am running. Now I need to find a new power steering box also.
 

MisterH

Bought an X
Not much this week. I just added oil to my '03. I wanted the gold R50 in the parking across from my job today. I want to get one next year.
 

BEEFY

I Smile when Gasoline Can Freeze
I welded a M17 1.5 fitting to a NPT fitting so I could fix my power steering because no one carries a M17 fitting.
 

CHUG

Lockers Installed
Supporting Member
Sun is up.. drinking Cold beer after performing hard work..
Added Two 22" Wipers, Plus, Orange juice to tank. I be ready for Climate cooling cycle. ;-)
 

xyoverland

[fully disclosed]
Supporting Member
Those look great. Dare I ask how much they were...
$631.02. The rear halo switches to amber with the turn signal. Made by TEQ Customs but took much longer than expected and in that time they took them off their website. The owner said they were too much of a pain and not worth it to make. They only had one guy that did them so they did them in batches. My 8 week lead time turned into just over 12, but I know at least one other in that batch placed their order 5 weeks before me. Some minor issues I had to fix with the wiring harness and lights but nothing too serious.
 

reaver

Lockers Installed
Supporting Member
$631.02. The rear halo switches to amber with the turn signal. Made by TEQ Customs but took much longer than expected and in that time they took them off their website. The owner said they were too much of a pain and not worth it to make. They only had one guy that did them so they did them in batches. My 8 week lead time turned into just over 12, but I know at least one other in that batch placed their order 5 weeks before me. Some minor issues I had to fix with the wiring harness and lights but nothing too serious.
Thanks for the info. I would not mind upgrading the headlights on the Fronty to something like this in the future.
 

MisterH

Bought an X
I got an oil change and filled up my gas tank for my 2003 Xterra. I added half a quart of Lucas oil stabilizer with the oil change because it's at 300,000. It was amusing to be at the gas station with my Gen 1 Xterra parked next to a Gen 2. Most Gen 2 owners seemed to think they had a better car. They didn't realize that I have a Gen 2 at home myself. Gen 2s have more power and are better on long road trips. Going to work and bombing around town, I do prefer my Gen1. Both are simple, but Gen 1 is super simple, and the layout is friendlier.
 
Top