OffRdX
Lockers Installed
- Location
- Port Orchard, WA
The lights are what I had left over from my rock lights. Every 3 LED's you can cut these strips and solder on your own leads.
I got the power for them from my new bus bar under the steering column.
From there I ran power to the fuse panel I installed in the driver's kick panel (old pic from when the fuse panel was first installed. The top two spots are now occupied by my trans cooler fan and engine bay lights).
From the fuse I went to the switch installed next to the mirror controls. I had two open spots now after I ditched the stock Offroad lights.
Then the power from the switch runs out to the lights in the engine bay. They ground is on a bolt just outboard of the stock airbox on the fender.
I got the power for them from my new bus bar under the steering column.
From there I ran power to the fuse panel I installed in the driver's kick panel (old pic from when the fuse panel was first installed. The top two spots are now occupied by my trans cooler fan and engine bay lights).
From the fuse I went to the switch installed next to the mirror controls. I had two open spots now after I ditched the stock Offroad lights.
Then the power from the switch runs out to the lights in the engine bay. They ground is on a bolt just outboard of the stock airbox on the fender.