Fundaze08
Test Drive
- Location
- Kee lo nah
Hi, wondering if anyone has wired their parking lights as the DRLs (Canadian X).
If so, could someone guide me to how this could be done?
If so, could someone guide me to how this could be done?
Wire Parking Lights as DRLs
- Thread starter Fundaze08
- Start date
- Location
- Denver Adjacent
It wouldn't be hard. You just have to find a keyed power wire under the hood somewhere and splice it to the wire feeding the parking lights.
thecoalition
Call me Daddy
- Location
- Richmond, Va
Wait...is there a difference? I just turn my parking lights on via the column control...
- Location
- Denver Adjacent
He's talking about having them on all the time with or without the switch if I'm understanding correctly.
thecoalition
Call me Daddy
- Location
- Richmond, Va
Oh...I see - canadian Xs seem to have DRL by default but US doesn't. On second gens I would assume you can do the reverse of this:
"Pop the hood, the fusebox in the far back passenger side corner of the engine bay is where you want to look. Remove the cover and look inside it at the fuse diagram. You should see a 10AMP fuse marked "DTRL", pull it out and your daytime running lights are disabled"
"Pop the hood, the fusebox in the far back passenger side corner of the engine bay is where you want to look. Remove the cover and look inside it at the fuse diagram. You should see a 10AMP fuse marked "DTRL", pull it out and your daytime running lights are disabled"
Fundaze08
Test Drive
- Location
- Kee lo nah
Yep, looking to have them always run instead of my headlights - no switch required.
I was thinking there has to be something I could do using the DRL control module.
I'll keep you guys posted if I come up with something - if anyone has anymore insight that would be great!
I was thinking there has to be something I could do using the DRL control module.
I'll keep you guys posted if I come up with something - if anyone has anymore insight that would be great!