- Location
- SW OK & formerly Eastern NM
So I started out with these parts.
I did a test fit with the hose clamp over the dephep to know where I wanted to drill the clamp. Drilling through the clamp sucks.
I drilled out the inside of the quick fist to make the bolt fit.
And the hose clamps.
I then assembled in this order.
And voila.
X nerds unite!
I did a test fit with the hose clamp over the dephep to know where I wanted to drill the clamp. Drilling through the clamp sucks.
I drilled out the inside of the quick fist to make the bolt fit.
And the hose clamps.
I then assembled in this order.
And voila.
X nerds unite!