Stalls after start

CAC

Test Drive
Location
Canada
Hello,

I have been having this intermittent problem where my 2nd Gen Xterra will die right after starting. It generally starts again the next time, but once or twice I had to try a third time. Once running, it runs fine. I had a MAF code, so replaced it and serviced the air filter and cleaned the throttle body. After all that, it did it once again. I did notice bank 1 STFT% is quite high as well. Any thoughts on what I should check?

OBD-IIOBD-II
DTCs: 2
----------------------------
P0102 [0x0102] Archive (inactive)
Mass air flow (MAF) sensor/volume air flow (VAF) sensor - low input
Mass Airflow (MAF) Sensor Circuit Low Voltage
Status: Permanent
----------------------------
P0113 [0x0113] Archive (inactive)
Intake air temperature (IAT) sensor - high input
Intake Air Temperature (IAT) Sensor Circuit High Voltage
Status: Permanent
============================
signal-2024-04-21-113524_002.png
 
Top