- Location
- Rancho Cucamonga, CA
Finally have all I need to do the swap (I think). Those of you who have done this please chime in and tell me if you think I'm missing anything. I will be putting anti-seize grease on all bolt threads.
1.) Titan M205
2.) Titan CV Halfshafts x2
3.) Titan Upper control arms x2
4.) Titan Lower Control Arms x2
5.) (12) M205 Halfshaft Flange bolts/nuts
6.) (3) 19mm Diff/Frame Bolts. Nuts for two of these.
7.) (8) 14mm new front DS bolts/nuts
8.) (2) new 32mm halfaxle/hub nuts
9.) 3 quarts of 80W-90 or 75W-90 Synthetic Gear Oil (2 Not pictured)
10.) PRG tie rod extensions
11.) 1" Spacers (may or may not use)
Thanks to Rook for compiling this list!
Any tips or suggestions as to what will make this easier, or problems/solutions you found along the way - please chime in! Thanks in advance!
1.) Titan M205
2.) Titan CV Halfshafts x2
3.) Titan Upper control arms x2
4.) Titan Lower Control Arms x2
5.) (12) M205 Halfshaft Flange bolts/nuts
6.) (3) 19mm Diff/Frame Bolts. Nuts for two of these.
7.) (8) 14mm new front DS bolts/nuts
8.) (2) new 32mm halfaxle/hub nuts
9.) 3 quarts of 80W-90 or 75W-90 Synthetic Gear Oil (2 Not pictured)
10.) PRG tie rod extensions
11.) 1" Spacers (may or may not use)
Thanks to Rook for compiling this list!
Any tips or suggestions as to what will make this easier, or problems/solutions you found along the way - please chime in! Thanks in advance!