Part numbers for 3" SL ball joints and bushings needed... Please ;)

K

KBC

Bought an X
Location
BC
Anyone have the part numbers for replacing the ball joints on AC's UCAs and the bushings?
I heard the Ball joints were for 95 and older pathfinders, correct? Not sure about bushings though and I'd prefer to not have to order them from AC. I'm in Canada and I need them ASAP.

Cheers! Eh.
 
K

KBC

Bought an X
Location
BC
I picked up a set of ball joints for a 95 Pathfinder and a set of energy suspension bushings that I will have to trim the length down a bit but they should work.
 
K

KBC

Bought an X
Location
BC
Don't try to trim bushings down, I cut up two sets before I pulled the UCAs off to realize the new sleeves wouldn't work. The inner diameter was fine (I did measure before I bought them) but the wall thickness was much thinner so I doubt the mounts on the frame would clamp down on the sleeves like they are supposed to. $50 mistake. Fortunately I had a used set of bushings so I picked the best halves to put back in until I get a new set in the mail.

How much life are you guys getting out of the AC UCA bushings?
 
You must log in or register to reply here.
Top