- Location
- Amarillo, TX
So you'll have some slidythingies before April's event huh?
NissTec Slider Photos
- Thread starter NissTec Lifts
- Start date
So you'll have some slidythingies before April's event huh?
- Location
- SW OK & formerly Eastern NM
- Location
- Amarillo, TX
Well hurry up...we'll get em tested when ya get up here.
TN4x4Xterra
Suspension Lift
- Location
- Knoxville, TN
If I didn't have Hefty Sliders already, I'd be all over these sliders like stains on a brand new mattress....
same here these things look awesome!
- Location
- Amarillo, TX
Ditto, except, giving up the ones I have now might result in damage cause mine are WAY overbuilt...
- Location
- SW OK & formerly Eastern NM
Are these going to be a stocked item or made to order?
X nerds unite!
X nerds unite!
- Location
- Amarillo, TX
You're just trying to make sure you have a set before April 
- Location
- SW OK & formerly Eastern NM
You're just trying to make sure you have a set before April
I'm not NOT trying to do that lol. I started to think about lead times earlier today and got a little worried.
X nerds unite!
- Location
- SW OK & formerly Eastern NM
I'm pretty tired so this was pretty funny to make.
X nerds unite!
- Location
- Amarillo, TX
Think you mean "HURRY UP AND TAKE MY MONEY!"
- Location
- SW OK & formerly Eastern NM
lmfao!!!!You're right, where are my manners
X nerds unite!
Fresh out of powder coat today and now available.
CLICK HERE
We do also offer a full line of Hefty Fab sliders, bumpers, and skids which are bad ass and overbuilt goodness!!
CLICK HERE
We do also offer a full line of Hefty Fab sliders, bumpers, and skids which are bad ass and overbuilt goodness!!
Killswitch
Bought an X
- Location
- Fredericksburg, VA
Post Removed. Nisstec, thank you guys for your continued support.
Others that quoted my posts, please remove the quotes. I voiced my concerns publicly and would like to remove that. I don't want to raise concern if there needs be no concern. Nisstec has done an awesome job supporting our aftermarket and I'm sure they will continue to do so.
Others that quoted my posts, please remove the quotes. I voiced my concerns publicly and would like to remove that. I don't want to raise concern if there needs be no concern. Nisstec has done an awesome job supporting our aftermarket and I'm sure they will continue to do so.
Last edited:
- Location
- SW OK & formerly Eastern NM
I hadn't noticed that. Would these be able to mount without attaching those?
X nerds unite!
X nerds unite!
- Location
- Amarillo, TX
Huh?? They looked like they mount the same as every other slider, bolted or welded to the frame, nothing to do with the body...correct me if I'm wrong, please.
Last edited by a moderator:
- Location
- SW OK & formerly Eastern NM
- May be bolted on using the 4 bolts per foot and
6 stock body mount locations- That's 18 bolts
holding each side in place! For sever off-road use
we recommend using the 6 body bolt locations
and fully welding the feet to your frame.
I know that Nisstec have these on their personal Xterra and that they know their stuff so I'm curious, mines already sitting in the online cart. Waiting for approval from the bank gatekeeper....
X nerds unite!
idratherbe
Skid Plates
- Location
- North Shore, MA
Copied from the description
- May be bolted on using the 4 bolts per foot and 6 stock body mount locations- That's 18 bolts holding each side in place! For sever off-road use we recommend using the 6 body bolt locations and fully welding the feet to your frame. *Choose bolt-on or weld on in drop down menu below* - Will work with up to a 3" body lift. - If you have a 3" body lift installed, we advise that you weld the feet to your frame for the best support.
- May be bolted on using the 4 bolts per foot and 6 stock body mount locations- That's 18 bolts holding each side in place! For sever off-road use we recommend using the 6 body bolt locations and fully welding the feet to your frame. *Choose bolt-on or weld on in drop down menu below* - Will work with up to a 3" body lift. - If you have a 3" body lift installed, we advise that you weld the feet to your frame for the best support.
Killswitch
Bought an X
- Location
- Fredericksburg, VA
Removed
Last edited:
- Location
- SW OK & formerly Eastern NM
I called and spoke to Chris about this and he said their machinist has the Pro4X with these on it and he's wheeled it hard! So I'm sold, added to cart, bank guard appeased, and ordered.
X nerds unite!
Last edited:
Killswitch
Bought an X
- Location
- Fredericksburg, VA
Posts removed. Please remove my quotes as well. Nisstec has done an awesome job supporting the community and I'm sure they will continue to listen to feedback from their customers. I do not want to raise concerns if there needs be no concern.
- Location
- SW OK & formerly Eastern NM
My sliders have officially been ordered, received confirmation!
X nerds unite!
X nerds unite!
- Location
- Middle TN
These look great!
- Location
- Amarillo, TX
Awesome!
- Location
- SW OK & formerly Eastern NM
I think I hit them once in Amarillo but not much. I wish I'd welded them on with a wide plate to make it easier to step on.
You want them to tuck in... And you say it would be nice to have more of a step, Till your in nice pants and your leg gets muddy
- Location
- SW OK & formerly Eastern NM
You want them to tuck in... And you say it would be nice to have more of a step, Till your in nice pants and your leg gets muddy
That's true, I do wear nice pants daily and have to step away every time. I guess I wish there was a kick out in the rear like some other styles, that and I wish they had bolted on to begin with in the factory holes.
- Location
- Amarillo, TX
Are they powder coated or just sprayed? If sprayed, scuff em bare in a few spots on the rear and have someone with a bender make you a step tab to weld on....then you can re-spray. If powdercoated....unhappiness...
- Location
- SW OK & formerly Eastern NM
Powder coated.