NMTerras
Suspension Lift
- Location
- New Mexico
So I'm changing fluids prepping for Moab and ran into a problem with the drain plug on the tranny (manual). Was using a 1/2 " breaker bar trying to unstick it and I felt it give a tiny bit...but it looks like it tried to strip the square hole a little and didn't move. I sprayed it with PB and I'll get back to it tomorrow, but I'm wondering whether anyone has a tip or two...should I go somewhere and try to find the right perfect fit 13mm square bit? Just keep using a breaker bar and add some lever length for more leverage? This is the first time I've run into a real stuck bolt issue in the 12 years I've had this truck...(no humidity = no rust).