Aftermarket Front Seat replacement

[TKDx00]

Has anyone actually replaced the front seats with Corbeau's or another maker? Mine really need replacing not just covering up.

 

[yellowx16]

intender on clubxterra just did, he got some brackets made for them too. if you check out his build thread be has some pics and a brief write up

 

[TKDx00]

Thanks...and I said I'd never go back to CX...never say never.

 

[yellowx16]

haha me too, I still visit there once in a while though

 

[Macland]

I'll do you one better. NMTerras did it with his first gen.

 

[NMTerras]

intender on clubxterra just did, he got some brackets made for them too. if you check out his build thread be has some pics and a brief write up

Just went over and read his build thread. That dude belongs over here!

 

[TKDx00]

I looked at both Intender and NMTerras builds for the seating setup. Those seats look great and they are definitely on my list. I just need to figure out if I've got to get the harnesses and take out my old belts.

 

[AZhiAZiAM]

I looked at both Intender and NMTerras builds for the seating setup. Those seats look great and they are definitely on my list. I just need to figure out if I've got to get the harnesses and take out my old belts.

you looking for 5 points?

 

[TKDx00]

I think the 4 pts. will work for me.

 

[NMTerras]

I put in the old belts, no problem. But Greg, I have to tell you, absent a significant mod to the brackets, or floor, or something, 6'5" aint gonna work. I have exactly 1" to spare, and I'm a hair over 6'0"

I mean, I guess you could lean it back some...

 

[Eric P]

Corbeau has seat brackets for the Xterra if you want to save yourself some grief. Go to a race shop and sit in a few to see what you like. Some 4x4 shop carry the less racer seats, but are all overpriced.

 

[NMTerras]

Corbeau has seat brackets for the Xterra if you want to save yourself some grief. Go to a race shop and sit in a few to see what you like. Some 4x4 shop carry the less racer seats, but are all overpriced.

I have those brackets in addition to the corbeaus.

 

[Eric P]

Thinking about a set of LG1s for my 08.

 

[TKDx00]

I put in the old belts, no problem. But Greg, I have to tell you, absent a significant mod to the brackets, or floor, or something, 6'5" aint gonna work. I have exactly 1" to spare, and I'm a hair over 6'0"
I mean, I guess you could lean it back some...

NM... could you measure the vertical's on the bracket, I'm hoping there's enough of them that I can cut 1-2 inches out and weld back together like Mr. Fink suggested or maybe cut off everything and weld just the feet back on.

 

[NMTerras]

I'll check it out ....

 

[TKDx00]

I spoke to Corbeau and all their seats are too small and too tall for a person with my body size except the A4 Wide model. So I need to see if there is another company that sells this type of seating or go w/ the A4.

Found MasterCraft safety: the Sportsman

 

[AZhiAZiAM]

http://www.dezertrangers.com/vb/parts-accessories/179720.htm

saw these i know you were looking around.