- Location
- Colorado Springs
I swapped out the stock auxiliary transmission cooler for the Z1 19 row stacked plate cooler. Install instructions were easy to follow so the install went fairly quickly, maybe 90 minutes. The only things I changed was how the return line connection was made, I found it easier to use a 5/16in barbed connector to link the stock line to the line supplied by Z1. The other thing I had to change was the thickness of the crush washers used on the banjo bolts. The washers supplied by Z1 were too thin so I couldn't get a good seal on the bolts.
Z1 Transmission Cooler Upgrade
Z1 Transmission Cooler Upgrade