Xterra boneyard

Hi guys I'm a new Xterra owner and have recently been buying parts xterras and now I have a boneyard of about 22 xterras and am pulling and shipping out oem used parts! From late 90s to 2006!
 

reaver

Lockers Installed
Supporting Member
Location
Caldwell, ID
Good to know! I just bought an 03. Would you happen to have a cargo net that fits the hooks in the back?
 
I took the best one and built it from parts out there and that's the one in the picture of my profile! And yes I have 7 cargo nets 2 grey, 2 tan and 3 black
 

reaver

Lockers Installed
Supporting Member
Location
Caldwell, ID
Sounds great man!

Do you happen to have any aftermarket skids, lift ucas, or idler Arm braces on those rigs as well?
 

reaver

Lockers Installed
Supporting Member
Location
Caldwell, ID
2" lift blocks is the most I'd want. I will take an idler Arm brace though!

There's a bunch of us who are gonna pick these trucks clean. Lol.
 
And I'm ok with that the cleaner they can be picked I can get them cut up and sent to scrap to appease the wife...lol my Xterra habit is starting to irritate her
 

BCXterra

Bought an X
2" lift blocks is the most I'd want. I will take an idler Arm brace though!

There's a bunch of us who are gonna pick these trucks clean. Lol.
You can cut the blocks easily enough. I used to run a 1.5” lift on my 4Runner, made it by cutting down a 3” kit.
 
I don't know how much these control arms lift it the bolt on ball joint is sitting at less of an angle and down farther than an oem control arm I will post a pic after bit
 

reaver

Lockers Installed
Supporting Member
Location
Caldwell, ID
Basically, I want to run a 3" suspension lift. Ucas in the front, and shackles and add a leaf in the rear. 2" body lift to clear 33s. Any parts you have that can facilitate that, I'll take!
 

RxnNic66

First Fill-Up (of many)
Location
TX
I need an intake plenum for a 1st gen. Mine is cracked and leaks out coolant QUICKLY. Got plenum?
 
Top