What Spares?

Gen X

First Fill-Up (of many)
Supporting Member
Location
Ashburn, VA
Hey all. Time to start buying spares before I ship my vehicle overseas. I’m heading to Chisinau, Moldova in August. They have Nissans in country so hopefully that means repairs and parts will be easier. However, I’m going to take some with me. Here’s my list.

Received:

2 - serpentine belts
2 - CV axles
1 - U joint rear
2 - U joint front
1 - inner tie rod end
1 - outer tie rod end driver
1 - outer tie rod end passenger

To Order:

2 - SPC ball joints
1 - alternator
1 - starter
1 - full set of cam and crank sensors (3 total)

I put on aftermarket headlights so will be shipping the stock ones plus spare bulbs.

What else do I need? What else do we normally break? Any recommended brands or part numbers?
 
Last edited:

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
Sounds like an interesting opportunity!

Outer tie rods are unique per side. I'd bring one for each side.

Id also bring enough U joints to replace all 3 if you had to.
 

Gen X

First Fill-Up (of many)
Supporting Member
Location
Ashburn, VA
Sounds like an interesting opportunity!

Outer tie rods are unique per side. I'd bring one for each side.

Id also bring enough U joints to replace all 3 if you had to.

Ahh, didn’t know they were unique. I’ll get a set for each side. For the U joints, is it the same part for all three?

Cam and crank sensors (3 total), couple of ignition coils.

Yes, thank you. I replaced them a couple thousand miles ago, but good to have another set.

Updated OP with recommendations.
 

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
Ahh, didn’t know they were unique. I’ll get a set for each side. For the U joints, is it the same part for all three?
The inners are identical. Just the outer are different.

The U joints, it's a 1330 at the transmission out back and two 1310s on the front driveshaft.
 

outback97

Wheeling
Supporting Member
Location
SLC, Utah
How many miles on your wheel hub assemblies? That might be nice to have a spare one of those. TIMKEN SP450701.

Not previously mentioned, and not necessarily saying bring spares, but the other items I've had to replace (2006 w/ around 130K miles), in order of importance: Starter. Rear axle bearing and seal. HVAC blower motor.
 
Top