- Location
- San Antonio, TX
That looks awesome!
- Location
- Covington, Va
What table is that?
- Location
- Rochester, NY
RockSlide tailgate table newer model. Designed for J##ps. Just drilled my own holes to fit Dave's bracket locations. All aluminum.
Tailgate Table
Rock Slide Engineering Tailgate Table for Jeep Wrangle JK /JL & Ford Bronco AC-TB-200
rockslideengineering.com
- Location
- Covington, Va
Looks awesome!
- Location
- Rochester, NY
Thanks man! Now have to get used to not seeing out the back window AT ALL. Those damned tall headrests and now the spare... At least @TheCrabby1 had his shorties from Odo on hold for me. Those will be a BIG help.
- Location
- Denver Adjacent
I've been seriously considering one of those rear view mirrors that does the camera so I don't have to deal with not seeing out the back.
- Location
- Rochester, NY
It’s so worth it. Just can’t go cheap. They’re garbage. I did a pioneer AV deck that I can turn on the rear OR front camera at will. With all the stuff the deck can do, I didn’t even think about a mirror. But holy crap the wiring was a pain.
C3NK0
Bought an X
- Location
- Rockville, MD
I need to add constant power to my back up camera, I will relocate mine once the bumper is installed so I’ll do it then. Brings up another question which I will leave it for Dumb Question section
- Location
- Burtonsville, Md
Finally switched Odo's rear rotor's/caliper's on to the 11 P4x .
Figured I'd replace the hard line's at the same time .
Figured I'd replace the hard line's at the same time .
Sturmovik
Bought an X
Installed some super bright spot lights with DRL build in .. very impressed with them.
they might not be Rigid or Diode Dynamics but hey they are bright !
View: https://www.youtube.com/watch?v=ao1hlXR-UbU
they might not be Rigid or Diode Dynamics but hey they are bright !
meisanerd
Need Bigger Tires
- Location
- Edmonton, AB, Canada
Bought it a new head unit. And like 15 cables to try to Frankenstein something together to not have to cut out any factory wiring, while keeping as many built-in features as possible.
- Location
- Burtonsville, Md
Installed new cabin air filter's and according to the new Big-Squatch sticker I gained one extra lb of torque ! 
- Location
- Colorado Springs
What kind of wine is good for polishing? It would seem to me that it would have to be a white wine otherwise the lenses would have a red tint to them.
I was drinking red. The headlights got a delicious soapy water and 3000 grit mix.What kind of wine is good for polishing? It would seem to me that it would have to be a white wine otherwise the lenses would have a red tint to them.
- Location
- McMinnville, Orygun
It's been a 5-8 months Since, charging this thing.. OOP's. It was down to 2 bars, Would work for a light jump..Maybe?. Lost count on the amount of Vehicles I jumped with it.. Not to mention my Cell phone, that which Failed to turn off while in a dead Cell zone. 2 day's later dead cell.. Charged up using Jumper..
Plugged it in.. Figure take photo.. I added a POST it sticker with Date & Time Charged. For history Reference..
Plugged it in.. Figure take photo.. I added a POST it sticker with Date & Time Charged. For history Reference..
C3NK0
Bought an X
- Location
- Rockville, MD
Attachments
Sturmovik
Bought an X
Installed some RGB rock lights turned out better then I thought
View: https://www.youtube.com/watch?v=lSL2W4WkgH4
- Location
- Virginia
some topo decoration
- Location
- Denver Adjacent
- Location
- Virginia
It’s the Edinburg Gap area where Peter’s Mill Run starts. Honestly chosen only because the topo lines have natural gaps and I could print it in pieces and assemble without having seams. I can cut up to 11.5”x23.5” and this is roughly 18”x26”. Roughly this area:
Or if you mean what is it made of, matte black vinyl. Looks bright when reflecting artificial light in a photo, but usually not very visible unless looking from a specific angle. Here are day pics:
Last edited:
- Location
- Denver Adjacent
Curious about the topo. Thanks!
- Location
- McMinnville, Orygun
- Location
- Virginia
I did! Designed it, cut it, assembled it, and installed it all myself.
Added a little compass rose to the corner this morning:
- Location
- McMinnville, Orygun
Driver side Cover King seat. Was Jet Black, With UV Fade now Light Grey. As it has started to fall apart from in & Out. Back Rest, has Mollie straps/Velcro. So keeping it. Added new seat cover on top of old.. might as well layer it up...
Found seat covers at Costco, $38 bucks for the Back & Seat.. Only need the bottom!. It's Okay for fit, Better now!.
Sun Fade is hard!!.
Mic was Jet black too.. 4 years, in sun Now a Blue Mic. ;-)
I expect Sun fade on new seat cover too.
Time will tell.
Before
After
Found seat covers at Costco, $38 bucks for the Back & Seat.. Only need the bottom!. It's Okay for fit, Better now!.
Sun Fade is hard!!.
Mic was Jet black too.. 4 years, in sun Now a Blue Mic. ;-)
I expect Sun fade on new seat cover too.
Time will tell.
Before
After
- Location
- Rochester, NY
Won in the raffle at ECXC this year. Only 5 ft long but it works for me as I’m running solo. Even has the USB LED light strip. 
- Location
- Rochester, NY
Just upgraded my upgraded dash tweeters. The little 1” JBL’s were too bright and they finally got to me. Replaced with some 3.5” Infinity Reference series. With a little hogging out, they fit snug as a bug in a rug. Just don’t try this at home folks (Unless you NEVER want your factories again). I am a trained professional. Professional what, still a mystery. 
- Location
- Denver Adjacent
I love Infinity Reference.
- Location
- Virginia
Nice. I went with same brand but smaller ones. Sounds great.
- Location
- Rochester, NY
Actually picked up the 3022 and 3002 as a combo package on fleabay. Now I don’t know what to do with the 3002’s.
Last edited:
- Location
- Caldwell, ID
I just finished converting the 100Ah Lifepo4 battery from the trailer to a mobile battery pack. It's now sitting in the X, behind the front passenger seat.
I was also able to fit the DC charger inside the box, so moving it between the Xterra and the trailer is as simple as picking up the box, and then plugging in couple of anderson plugs.
I was also able to fit the DC charger inside the box, so moving it between the Xterra and the trailer is as simple as picking up the box, and then plugging in couple of anderson plugs.
- Location
- Colorado Springs
What charger did you use? Photos please.
- Location
- Caldwell, ID
Renogy 20A. I don't feel like taking the box apart again.
I use an Aolithium 100Ah battery. This, plus all the wiring, plus the charger JUST fits inside a NOCO battery box (grp 27-32 size).
I'll take a picture of the installation and box tonight. Maybe, if you're EXTRA nice, I'll open it up and take pics of the inside.
- Location
- Virginia
Replaced crappy, cheap Chinese knockoff velcro and metal-tipped straps with American made UV-protected Cordura webbing and quality buckles. I’m counting it as “for my X” since the metal buckles won’t be slapping the side paint anymore.
- Location
- Virginia
Changed these guys out. Messy but simple. Mine was a 2015 and in really good shape. I tried to break off the plastic (once off) but couldn’t and it took a few whacks with a hammer to get the fitting to break off where I usually see in the pictures.
- Location
- Covington, Va
Good idea. I snapped mine with my thumb with ease. They were BAD.
- Location
- Colorado Springs
Bought a Battle Born Battery and Redarc charge controller yesterday at Xpo Mtn West. Going to redo the aux battery for the fridge.
- Location
- Virginia
Femco quick drain installed. No more wrestling with the skid plate to do an oil change! Hopefully. Torque spec on this thing was 12 ft lb and my brain is going to make me check it for leaks pretty regularly.