WENT trading block 2014

dixie1865

dixie1865

Bought an X
Location
Lockport, IL
Here's what I've got for sale (or reasonable offer). Parts off '08 S w/ 45k miles at the timeof removal and parts stored inside since then:
Factory Rear bumper $40
Factory side steps $40
Lower control arms (bushings and ball joints good) $65 for the pair
R180 3.13 $160
CV shaft $30
front wheel bearing w/ ABS sensor $30 SOLD
Rear ABS sensors/cables from C200 (both sides) $30 each
PRG Delrin LCA spacers (new) for both sides $40 (80 new)
PEAK 800w power inverter (never installed or used) $25 SOLD
Extended U-bolts, shims, roll bar extenders and leaf pack pins from Nisstec Ultimate lift kit (new) $50
4 - 5 spoke S wheels not perfect (minor curb rash) $40 each or $140 for all 4
If interested in anything PM me. I have some pics if you want detailed pics send me your number and I'll take them and send to your phone.
 
Last edited:
JayAre

JayAre

First Fill-Up (of many)
Location
Nashville
dixie1865 said:
Here's what I've got for sale (or reasonable offer). Parts off '08 S w/ 45k miles at the timeof removal and parts stored inside since then:
Factory Rear bumper $40
Factory side steps $40
Lower control arms (bushings and ball joints good) $65 for the pair
R180 3.13 $160
CV shaft $30
front wheel bearing w/ ABS sensor $30
Rear ABS sensors/cables from C200 (both sides) $30 each
PRG Delrin LCA spacers (new) for both sides $40 (80 new)
PEAK 800w power inverter (never installed or used) $25 SOLD
Extended U-bolts, shims, roll bar extenders and leaf pack pins from Nisstec Ultimate lift kit (new) $50
4 - 5 spoke S wheels not perfect (minor curb rash) $40 each or $140 for all 4
If interested in anything PM me. I have some pics if you want detailed pics send me your number and I'll take them and send to your phone.
Click to expand...

If that R180 had 3.63 gears in it, I wouldn't mind picking it up for a spare. :-(
 
GPD605X

GPD605X

Lockers Installed
Founding Member
Location
Gulfport, MS
I've got some 2nd Gen stuff...
OEM 17" Wheel (Not this particular wheel but looks just like it. It was my factory spare, never used) - $50? Or trade for Xterra goodies
IMAG0161-1.jpg

OEM 16" Frontier Wheel - $50 or trade for Xterra goodies
nissan-frontier-wheels-62463-b_zps145212b5.jpg

Stock Step rails - trade for just about anything
 
gamecock257

gamecock257

Skid Plates
Location
Clinton, SC
I have a stock Pro 4x radiator skid, I'll give it to whoever wants it. It has some scratches and a small dent, but still in decent shape. I may be able to round up the hardware too. Pm me if interested.
 
caseycamby

caseycamby

Suspension Lift
Location
Marion, NC
I have this.. http://www.autozone.com/autozone/ac...-tow-hook/_/N-25fm?itemIdentifier=969035_0_0_

I used it as a rear recovery point until I got my rear bumper tire carrier. Mine only came with one bolt, not the two shown, still the two holes though. It bolted straight up to the frame with one hole. To use the other hole you'd have to drill into the frame. I never did, I just used the one bolt. Offer me anything!


I will also have a stock first gen crossbar. It's painted black but it's scuffed up. Free to a good home.
 
Timrich

Timrich

Super Duper Moderator
Founding Member
Location
Central FL
gamecock257 said:
I have a stock Pro 4x radiator skid, I'll give it to whoever wants it. It has some scratches and a small dent, but still in decent shape. I may be able to round up the hardware too. Pm me if interested.
Click to expand...
Is it any better than the non Pro 4x skid?
 
Timrich

Timrich

Super Duper Moderator
Founding Member
Location
Central FL
Roadwarrior

Roadwarrior

Titan Swapped / SAS'd
Founding Member
Location
Probably in class..
caseycamby said:
I have this.. http://www.autozone.com/autozone/ac...-tow-hook/_/N-25fm?itemIdentifier=969035_0_0_

I used it as a rear recovery point until I got my rear bumper tire carrier. Mine only came with one bolt, not the two shown, still the two holes though. It bolted straight up to the frame with one hole. To use the other hole you'd have to drill into the frame. I never did, I just used the one bolt. Offer me anything!


I will also have a stock first gen crossbar. It's painted black but it's scuffed up. Free to a good home.
Click to expand...

caseycamby said:
Still have that antennae if you're interested Tim
Click to expand...

I want that hook for the rear, and I think I have dibs on the antenna but I don't think I am going to take it. I like the 4ft. It lets me reach out and connect with some far out CBs.. So you can have it.
 
caseycamby

caseycamby

Suspension Lift
Location
Marion, NC
The hook will be yours then!

I meant to say JayAre not Tim.. I don't know what I'm thinking haha. Tim had the 3ft up for grabs and I had the 4ft so if you want that as well, it can be yours Tuck.
 
gamecock257

gamecock257

Skid Plates
Location
Clinton, SC
2nd gen retractable cargo cover. $25, it's listed in the for sale section but I have decided not to ship. Brand new would fit any 05-present.


Sent from my iPhone using Tapatalk
 
gamecock257

gamecock257

Skid Plates
Location
Clinton, SC
Not sure if its even worth posting but...

2nd gen rear swaybar (with links)
Stock Pro 4X light covers
The full size 2nd gen rear seat hearests (would love to trade for a set of the smaller ones)

All of this free to a good home, just PM me if you want any of it.
 
Roadwarrior

Roadwarrior

Titan Swapped / SAS'd
Founding Member
Location
Probably in class..
Thinking about selling my WK (1st Gen) sliders in pursuit of building my own.

These sliders are the most badass slider on the market, my only hangup on them is that they are not designed for the 2" BL. I am open to offers on these and since these were donated to me, all leftover money from the slider build will be given to a charity of choice.

Cheers, KCCO.
 
Roadwarrior

Roadwarrior

Titan Swapped / SAS'd
Founding Member
Location
Probably in class..
Thinking about selling my WK (1st Gen) sliders in pursuit of building my own.

These sliders are the most badass slider on the market, my only hangup on them is that they are not designed for the 2" BL. I am open to offers on these and since these were donated to me, all leftover money from the slider build will be given to a charity of choice.

Cheers, KCCO.
 
TN4x4Xterra

TN4x4Xterra

Suspension Lift
Location
Knoxville, TN
gamecock257 said:
Not sure if its even worth posting but...

2nd gen rear swaybar (with links)
Stock Pro 4X light covers
The full size 2nd gen rear seat hearests (would love to trade for a set of the smaller ones)

All of this free to a good home, just PM me if you want any of it.
Click to expand...
Dibs on the light covers. I could use an extra.
 
FishOnDan

FishOnDan

Bought an X
Location
Round Lake Beach, IL
I have a few things available:

2 - GoodYear DuraTrac on Steel Wheels - 285/75 R16 Load E - 7/32" thread left (factory thread is 18/32", so they have 40% thread left, ideal for a 1st or 2nd spare) - 2 SOLD
2 - Second Gen Factory Crossbars
5 - Factory Front Tow Hooks
1 - Full set Second Gen Factory Mud Flaps
1 - Brand New Superior Automotive Heavy Duty Underleaf Helper Spring (http://www.pepboys.com/product/details/1017533/00987)

PM me for photos and/or prices.

Dan
 
Last edited:
GPD605X

GPD605X

Lockers Installed
Founding Member
Location
Gulfport, MS
I've got an extra set of bushings that I got when I got my new OME Darkar leaf springs and 2 OEM half shafts... Not sure if they would be good trail spares or not


Sent from my couch
 
You must log in or register to reply here.
Top