- Location
- Covington, Va
Not sure about flag mount. No antenna mount though.
TerryD's 2007 Xterra S "Pepper" *NOW WITH TITAN SWAP!*
- Thread starter TerryD
- Start date
- Location
- Covington, Va
Installed my Frontrunner table from @12° North Industries this evening. Got some HDPE on the way to replace the wooden extension since this table is meant to be installed inside a Jeep.
- Location
- Covington, Va
Hub caps and stickers.
- Location
- Covington, Va
Modded....
- Location
- Caldwell, ID
You should paint those steelies black man. Would look good.
- Location
- Covington, Va
I don't have the interest to keep up with them after I paint them honestly. If I chip one or scratch it really bad or even have to replace one, then I have to go back through that process and I hate tedious stuff like painting.
- Location
- Caldwell, ID
That's fair, and I can't say I blame you.
- Location
- Covington, Va
- Location
- Burtonsville, Md
R you sure there's not stitches' under that band-aid ?
It'll result in an infection like the spot next to the band-aid !!
- Location
- Denver Adjacent
I told you I'd lost interest. Haha
- Location
- Covington, Va
Fair enough.
- Location
- Near The Pointy End, NV
Thanks for the Mention of us @TerryD
Personally a little jelly I dont have a swing out feature to use one myself on my rig right now. I do believe that the table portion (wood piece) can switch sides too if you wanted to keep food prep away from fuel cans at later date.
Be excited to see it in real use soon, don't forget to tag us on at least your first adventure and using it..! ; )
- Elena
- Location
- Near The Pointy End, NV
- Location
- Covington, Va
Send me one! I love stickers!
- Location
- Covington, Va
My wife ordered a turn signal switch with the fog light switch. Now I need to pick some fog lights....
Thinking about these. Apparently made by Nissan.
Thinking about these. Apparently made by Nissan.
Do you already have the brackets those would connect to? If so I have that exact thing on the shelf in the garage you can have free. And two types of bulbs for them. I had to keep the bracket for the SS3s though.My wife ordered a turn signal switch with the fog light switch. Now I need to pick some fog lights....
Thinking about these. Apparently made by Nissan.
- Location
- Covington, Va
My bumper doesn't use the brackets. The lamps bolt directly into the bumper.
These are OEM Nissan LED foglights?
- Location
- Denver Adjacent
That's what they claim. Look like Morimoto. I didn't know there was an OE LED fog.
- Location
- Covington, Va
I didn't either till I found that and looked up the part #. Apparently they're for later Titans but use the same mounts as Xterra and Frontiers.
- Location
- Denver Adjacent
Did you find a cross reference to a Nissan part number?
- Location
- Covington, Va
Listed right there on Z1's site.
999F1-W5BLD
Searched it on NPD (I think) and came up as Titan IIRC.
999F1-W5BLD
Searched it on NPD (I think) and came up as Titan IIRC.
Mine were originally from Nissan Parts Puller. I can try to remember to grab pics tomorrow.
- Location
- Denver Adjacent
Yeah. Looks like 143 is the cheapest. I wonder what the color temp is.
- Location
- Covington, Va
I actually set it up to go behind the carrier to make it more compact around camp and it also works with my pull out trays in my drawer set so that I wind up with a lot of "counter" space back there when it's all open.
I've got a buddy who came up with the HDPE plate to replace the wood in our tables with before they begin to rot. His actually froze, and the ice inside it caused it to swell and stick in the slides. The plastic shouldn't have those issues and it will be like having a built in cutting board I can hose off at the car wash.
- Location
- Covington, Va
Are those OE ones sealed? The #1 reason I bought the SS3 kit to replace mine was every time I crossed a stream I got water in the fog light. Even after putting silicone around the seat of the bulb I did. Then because the bulbs were LED they didn’t crank out enough heat to quickly burn off the moisture.
- Location
- Covington, Va
I don't know if they are sealed or not but I would hope they are. I like the thought of OE LED because they will be more attentive to RF radiation then most after market.
- Location
- Denver Adjacent
I'd buy the OE ones. Do that and let me know what color temp they are.
- Location
- Covington, Va
That's the direction I'm leaning.
- Location
- Covington, Va
Ok. I ordered the OE LEDs from Z1. We'll see how they do.
- Location
- Covington, Va
woot?
Last edited:
- Location
- Burtonsville, Md
Well ?????? we're waiting !!
- Location
- Covington, Va
Video posted. What more you want?
C3NK0
Bought an X
- Location
- Rockville, MD
I didnt notice the video either, we aint diode dynamics rich, we needed yay or nay haha
- Location
- Denver Adjacent
They look 5k-ish?
- Location
- Covington, Va
I'm not either. These are OE LEDs from a 2017+ Titan.
- Location
- Covington, Va
I don't know man. They're very white compared to my halogen headlights. You can pretty easily see the cutoff. And how much light they throw onto the sides of the road.
C3NK0
Bought an X
- Location
- Rockville, MD
Looks solid, ı might get me a pair
- Location
- Denver Adjacent
OK. I'm sold. Plug-n-Play I assume?