RLC fan page

XTP_Dyer

First Fill-Up (of many)
Location
Nashville
Right? I know I'm going to be wanting one soon..Heck, he might even do a slight "GB" discount if enough people are interested. I'm in Louisville about 10 minutes from the shop, so I could always go in for measurements.

I'm running by the shop in a few hours to have him do something on my bumper, I might bring it up and see what he thinks.
 

XTP_Dyer

First Fill-Up (of many)
Location
Nashville
Seems like some general interest. I tossed the same comment on the ClubX page.

I'll run the idea by James today and see what he thinks.
 

caseycamby

Suspension Lift
Location
Marion, NC
I think it's a great idea but I couldn't/wouldn't for certain reasons.. but I think it's great and I'm sure he wouldn't mind a bit to do it!
 

XTP_Dyer

First Fill-Up (of many)
Location
Nashville
Asked last night if he could do it and sure enough, I'm in the shop the next day and the guys at RLC cut the spot for my winch. Score another one for rocking customer service.
30vg6dj.jpg


Also, I talked briefly about the front skid plate. He said he wasn't sure how quite how he would go about it based off of the bumper design, but if he got a vehicle in the shop for a couple of days, that he would be glad to make one.

With that being said, who is realistically interested? He was kind enough to fit me into the schedule to do the work on my bumper, so I wasn't going to take his time and talk specifics without having truly interested numbers to back it up. I couldn't name a price, but I know Shrocks is around $115..so likely somewhere around there? Maybe more/maybe less.
 

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
Asked last night if he could do it and sure enough, I'm in the shop the next day and the guys at RLC cut the spot for my winch. Score another one for rocking customer service.
30vg6dj.jpg


Also, I talked briefly about the front skid plate. He said he wasn't sure how quite how he would go about it based off of the bumper design, but if he got a vehicle in the shop for a couple of days, that he would be glad to make one.

With that being said, who is realistically interested? He was kind enough to fit me into the schedule to do the work on my bumper, so I wasn't going to take his time and talk specifics without having truly interested numbers to back it up. I couldn't name a price, but I know Shrocks is around $115..so likely somewhere around there? Maybe more/maybe less.
Legitimately interested
 

XTP_Dyer

First Fill-Up (of many)
Location
Nashville
I wouldn't be able to do this immediately, due to
Other mods being done this month. However, I *absolutely* plan on getting this going sometime this Fall.

So, let's generate some interest and see if we can't get some
People interested.
 

KChurch86

Banned
Founding Member
I don't have any new pics yet, and I haven't even mounted it yet either, but I love my rear bumper with tire carrier. The build quality is outstanding, and it seems like it'll easily hold up to any abuse I give it (and plenty more beyond that.)

I asked for a 2" receiver and the standard 3/4" clevis mounts, which accept a 7/8" pin. I left the design of the swing arm up to James, and I think he came through big time. The swing arm also came pre-drilled for mounting the license plate, I may or may not put mine there though, I'm undecided.

One design feature I really like is the reinforcements on the receiver, which include a massive square tube that runs the length of the bumper behind the skin. There's also 5 gussets, 2 of which double as safety chain attachment points.

Here are the photos from the RLC Facebook page:

4f4642aaebdb9c01a8e189c6ce5fc1bc.jpg


aa5e5d6a9c66b89936f9a554e247be05.jpg


0c1d363c8bc352ebcf857c285a02e1f3.jpg


71cca5edf1841f2be21896ad9e2ee422.jpg


And a few pictures of my own:

2568043edf0af605e170c6c19dd8eda6.jpg


ef9094a4a4530a1f68ff2193196ad7ac.jpg


127a0dce06eabab23e23e1e539b95497.jpg


27af6566322e845b93863a912b9da40a.jpg
 

XTP_Dyer

First Fill-Up (of many)
Location
Nashville
Oh, and I reeeaaally wish I knew that HiLift jack points were a thing, I would have added them as well.

So eager to see this thing finished and painted. He needs to advertise a rear bumper now that he has made a few..Nobody seems to realize he can do them and with how all the other companies are going, people would/should eat this up.

To my knowledge, he hasn't done them on any others, and it was completely him! I just asked if he had a way for my hi-lift to be used..Made those awesome slots with some serious reinforcement to them.
 
Top