Reseating a tire on the trail. :Article

Airmapper

First Fill-Up (of many)
What's wrong with this way? I mean come on, you don't "need" eyebrows. :p

[video=youtube;t7FIvAw2wC4]https://www.youtube.com/watch?v=t7FIvAw2wC4[/video]
 

Mirage

<img src="http://i164.photobucket.com/albums/u7/ra
Founding Member
Location
Greenville SC
pulling the valve stem core is the step I forgot at NXM, I had the tank and regulator at 200psi.
 

Mirage

<img src="http://i164.photobucket.com/albums/u7/ra
Founding Member
Location
Greenville SC
What Mirage you dont mean the 2 gallons of gas that Cody poured down that tire was the right way to do it?????

I would say whenever fire extinguishers are pulled out, its probably not the right way to do something haha.
 

RATTFINK

XN OG Admin.
Founding Member
Location
Conroe, TX
You can read it as a advert for Powertank, if you want. It still has a lot of helpful tips.

Sent from a Galaxy S4
FAR, FAR AWAY!!
Instagram: BriarFiend_rattfink
 

gorillamel

Lockers Installed
Founding Member
Location
Idaho!
I found it informative if nothing else. And it reminded me I need to get a valve stem tool thingymajig.
 

granitex

Skid Plates
Founding Member
Location
Columbus OH
I always preferred using a ratchet strap to squeeze the tire evenly all of the way around, It helps push the tire out to the rim.

You can also use a plastic water/pepsi bottle with a section of fuel line over the exhaust to re seat a tire.

When you get the stem tool, pick up two of them, one for the tool bag, and one for the glove box. They are cheap enough and you will never be able to find it if you only get the one.
 
Top