PRG UCA Spherical Bearing Bolt & Spacers

RM975

First Fill-Up (of many)
Location
Templeton, Ca
Does anyone have a line on these for the 7/8 I.D. bearing set up? These Dirt Kings are for a Titan style 1" I.D. and I am rebuilding my UCA's, I could go 1". However, they are 6 weeks out. I just tore things down today to rebuild the front suspension and regear the front end..........maybe I have time.

UCA_SPACER_KIT_e672a209-00de-44ec-ac9e-9f4529b371b6_1400x.jpg



PRG / Greg has the kit to upgrade the Ebay arms with good bearings, it's still the 1" set up though. Any guesses why I don't want to order from PRG.....................
 

IssacHunter

Test Drive
If you want new spherical bearings they're FK AIN16T. I get them from SummitRacing. They aren't that cheap but replace them both at same time as in my experience they always fail close to each other.

Cheers.
 

RM975

First Fill-Up (of many)
Location
Templeton, Ca
If you want new spherical bearings they're FK AIN16T. I get them from SummitRacing. They aren't that cheap but replace them both at same time as in my experience they always fail close to each other.

Cheers.
Thank you, but it is the taper bushing and bolt set I am looking for. If it was just a misalignment bushing, I can find those all day. It's that taper portion that going into the spindle that seems to have made this special sauce.

Also, the "16" is if you have the 1" bore bearing. Mine are PRG Xterra/Frontier UCA's with the 7/8" bore, so I use "14".
 
Last edited:

jsexton

Need Bigger Tires
Location
Lewis Center, OH
A few years ago I searched forever. Broke down and ordered them from PRG.

I've found if you call, and he has the parts on the shelf, you get things pretty quick. It's rolling the dice when something is back ordered.
 
Top