Power steering rebuild

Noltamsinned

Test Drive
Location
Batavia, NY
Hi,
I wheeled at ECXC this past weekend and now my power steering gear box is leaking REALLY bad. I found a link on how to rebuild it but the pis won't load. I was wondering if anyone did this before and could give intruction for it?
 

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
Do you have a link for the rebuild? If it's here I might be able to fix it.

It's a pretty straightforward process. There's only like 6-7 parts in the whole thing. It consists of taking the gear set out and replacing all the seals and O rings.
 

Bklyn.X

Skid Plates
Moderator
Supporting Member
Founding Member
Location
Brooklyn, NY
Brian's write ups are on point. Ya might be able to throw some stop leak in there to hold ya til you can get to it

01-PowerSteeringStopLeak_800x950.jpg


It's holding mine until I change it out.
 

Noltamsinned

Test Drive
Location
Batavia, NY
Photobucket really screwed everyone that's for sure. Ill throw some of that in it in when I change it. I started work on and Man rust is a killer, I spent 5 hours and was lucky to get 5 bolts off. The massive nut holding the pitman arm on took some time to get off.
 
Top