Please welcome in Hep's Designs to the Nation

Jack Stilts

Skid Plates
Location
Michigan
I love the Dephep roof rack I got. I drove to his place and picked it up.


Sent from my iPhone

Hey man, that's what Tony and I are talking about right now. How did you end up measuring for the rack? It seems like the measurements I gave him will cause some problems with the clamps near the rack boots.
 

ChiXterra

Wheeling
Hey man, that's what Tony and I are talking about right now. How did you end up measuring for the rack? It seems like the measurements I gave him will cause some problems with the clamps near the rack boots.

I think I measured the width. The one thing I did though, was take off the Nissan basket. Tony can make an extension that bolts on to the rear of the Dephep rack if you want the extra length. I didn't find it necessary. The clamps work just fine then.
 

Dephep

<img src="http://i164.photobucket.com/albums/u7/ra
Site Sponsor
Location
Warsaw IN.
Yep thats what I was thinking, Jack is going to pick it up so we can go long, size does matter, :)
 

metzican

Suspension Lift
Location
Lafaytte, la
I have to say this thing is killer. The build quality is second to none. The welds are all smooth. Nice and clean. Its all most ready to paint at delivery just a nice wipe down and ready to go.

2013-03-14160438_zps29155036.jpg
 

Dephep

<img src="http://i164.photobucket.com/albums/u7/ra
Site Sponsor
Location
Warsaw IN.
@Dephep,

Did you ever get my email address in the PM's to generate that invoice? Haven't seen it come across yet.

Man I'm sorry, if I didnt then spam got it or I screwed up somehow, probably me, I will look again.

I have to say this thing is killer. The build quality is second to none. The welds are all smooth. Nice and clean. Its all most ready to paint at delivery just a nice wipe down and ready to go.

I'm glad ya dig it, can't wait to see it all done and loaded up.
 

Dephep

<img src="http://i164.photobucket.com/albums/u7/ra
Site Sponsor
Location
Warsaw IN.
Jack did you decide to take off the basket and how much longer did you want it if you do?
 

jakedublu

Test Drive
Location
Bothell, WA
Delivered

Got my rack today. Thanks bro! Looks good. Took it to a local Line-X (Lynnwood, WA). $150 for the rack and brackets to be sprayed. I think I'll replace the bolts w/ stainless though. Thanks for the sticker too...
 

Dephep

<img src="http://i164.photobucket.com/albums/u7/ra
Site Sponsor
Location
Warsaw IN.
You didn't drill out the holes for the mounting brackets. Was it over looked?

Yea Jake i must have screwed up, real sorry, like I said in the email and the pm and now here, I wont make excuses I must have overlooked it, but I can make it right some how, If you want the money back you have invested I sure will do that for you, what ever you need let me know and I will take care of it, I have never forgot to drill mounting holes that I know of but I did this time and sure do apologize. Please let me know how you want me to take care of this. sorry bud. :(
 

jakedublu

Test Drive
Location
Bothell, WA
Yeah that works. Had to drill holes after it was sprayed. Didn't even look at the hardware until I went to mount it. I live in WA so basically it's rusting daily. I have picts. of it before being sprayed if you'd like to see... Thanks for the quick response. That makes good business, unfortunately it didn't work out this time.
 

Dephep

<img src="http://i164.photobucket.com/albums/u7/ra
Site Sponsor
Location
Warsaw IN.
Jake I just sent the refund of the cost of the rack,sorry for your trouble, put some silicone under the bolts and you shouldn’thave any issues. again I apologies.
 

Dephep

<img src="http://i164.photobucket.com/albums/u7/ra
Site Sponsor
Location
Warsaw IN.
No problem Jake, sure am sorry this happened but I bet it never does again, I think I must have been getting to cocky with the builds, this will make a guy take a second look before product goes out the door. thanks Jake.
 

Dephep

<img src="http://i164.photobucket.com/albums/u7/ra
Site Sponsor
Location
Warsaw IN.
Glad you guys got this taken care of. It's always good to see someone take care of their customers.

I do my best, this is what happens when a fab guy gets cocky, back to basics. {forhead slap errrrrrr} forgot the damb holes!!!!!!!!!!!!!!!!!!!!!
 

Jack Stilts

Skid Plates
Location
Michigan
I ordered one from him - going to pick it up at the GLX run. I know he's made them for a few 1st Gens before (ChiXterra and possibly Prime?), but I don't know if they're going to stay a custom build, or if they're going to become a standard item like the 2nd Gen.
 

Dephep

<img src="http://i164.photobucket.com/albums/u7/ra
Site Sponsor
Location
Warsaw IN.
Heck yea I make them for first gens, standard is pretty much turning out to be 40" so it fits before the back curve and after the front plastic. making a few fronty racks recently too, first and second. Real busy now but things slowing down a bit after the tax time thing I think.
 
Top