NMO dilemma/Dumb Question

C3NK0

Bought an X
Location
Rockville, MD
I got the MXT275 from Midland, I would like to install the antenna on the roof with a nmo mount (already purchased along with 6bd gain antenna)

I was hoping that I could take out the rear dome light and have access to roof for drilling/mounting. Looks like not gonna work since there is beam running across. After doing some research on google, I figured I could do slightly front of the hatch dome light.

Here is the issue or I need help with, Do I have to undo the entire roof liner or can get away by lowering it from the rear a bit to gain access.

Don't want to do the smack middle of roof since I carry Ski's in the winter. Don't want to do hatch mount like @ffxcores because I am an idiot, I want certain look to please me.

Thanks in advance.
 

jsexton

Need Bigger Tires
Location
Lewis Center, OH
I was going to do the same thing and found the same issue. I ended up mounting it about 6" in front of the very rear cargo area lamp. I could get it there without dropping the entire liner. let me see if i can find pics.
 

jsexton

Need Bigger Tires
Location
Lewis Center, OH
Here it is. I can get a measurement if you want.

Use a step bit for this so the hole stays round. If you use a regular bit it will likely end up not round, and possibly not flat either. Sheet metal is a b to drill into cleanly.

I mounted mine under the cup holders against the center console. Ran the cable under the carpet under the passenger seat, up the B pillar, and through the headliner. Tape measure worked great to fish it through the headliner. had probably 2' to spare (I believe it was about 18' cable).

Q4T6jmLl.jpg


kOAYjC1l.jpg


ooZBd9Gl.jpg
 

C3NK0

Bought an X
Location
Rockville, MD
that's the area I was thinking, if you can get a measurement that would be dope! I already got a stepper bit set, so I think I'll be alright.

Also did you get a 3/4 nmo or 3/8 mount. With the 3/8 nmo I got, I have to bring it from the inside. I wonder if it's gonna create any complications.

Thanks for the great resource!
 
Top