Moving sale. All my spares must go. Nashville, TN

M

mac11

Bought an X
Location
Nashville
Since it's a beautiful day today I'm cleaning out my shed. I will detail and photog all the parts I have left. Would rather sell/ship this all the pack and transport to the new place. Everything is for a 1st generation Xterra.

my paypal address is mac1183@gmail.com please put what you are getting in the memo box with the payment. It helps me keep payments/shipments together.

To get things started this is what I know I have:

stock rear bumper. Perfect physical shape, no rust. Has some paint flakes.

Nearly new looking/no rust OEM hitch with frame stiffeners.

Black drivers front fender with a little paint flaking where the trim goes over the wheel well. No trim included.


Entire main Engine wire harness with sub harness and ecu, Fuel rail with all injectors for N/A engine.
ydevyjy5.jpg

Pair rear leaf springs.

1 pair roof rack crossbars.
a8ypybu5.jpg


Much muxh more.

Passenger airbag
Window motors, regulator, track
Driver side power mirror
Ac compressor

Sent from my iPhone using Tapatalk
ubutusa7.jpg
 
Last edited:
M

mac11

Bought an X
Location
Nashville
This bumper was at some point coated black. The black paint is flaking. The factory paint looks I be in good shape underneath.

yhu7atuq.jpg


yhymynyt.jpg



Sent from my iPhone using Tapatalk
 
M

mac11

Bought an X
Location
Nashville
"Stuff"
00-01 Headlight set. Oxidized.
Pass. Corner/turn signal light housing
00-01 fogs. 1 with bracket - SOLD/paid (deadpilot)
00-01 hvac controls with knobs

muvaqubu.jpg

Front center support with hood latch and horn.
Air bag module
pame5yme.jpg



Sent from my iPhone using Tapatalk
 
Last edited:
M

mac11

Bought an X
Location
Nashville
And nearly complete matching interior 00-01-
all plastic pieces,
Instrument cluster and surround trim
center console, and shifter surround (4wd)
glove box,
all 4 door cards,
rear seats top and bottom and
pass. Front seat.

Missing driver seat which was ripped up.

qe8y2a2u.jpg


da7a2unu.jpg

Sent from my iPhone using Tapatalk
 
Last edited:
slantyshanty

slantyshanty

Bought an X
Location
'Merica (DFW)
What do you want for the two crossbars, both fuel doors, and (if you have it) the plastic piece that covers the inside hatch (the part that the 1st aid kit would attach to) shipped to 49735?
 
M

mac11

Bought an X
Location
Nashville
I just tore through all the interior, I do not have the hatch trim piece. I think I used it on one of the truck I sold this summer.

Everything else $90 shipped to you.
 
robcarync

robcarync

Sliders
Location
Raleigh, NC
Any chance you have an ABS sensor/wire for the front right wheel?

Question on the AC condenser...I seem to have a line leaking from what appears to be my AC condenser...see attachment. Do you know if this hose can be replaced individually, or does the entire condenser need to be replaced? I looked around under the hood and it looked like it wasn't really a separate part. I haven't removed those parts before, so wasn't sure. Saw the pic that you had one, so thought I would ask if you could offer any insight.
 

Attachments

  • ACHose.jpg
    ACHose.jpg
    77 KB · Views: 15
M

mac11

Bought an X
Location
Nashville
robcarync said:
Any chance you have an ABS sensor/wire for the front right wheel?

Question on the AC condenser...I seem to have a line leaking from what appears to be my AC condenser...see attachment. Do you know if this hose can be replaced individually, or does the entire condenser need to be replaced? I looked around under the hood and it looked like it wasn't really a separate part. I haven't removed those parts before, so wasn't sure. Saw the pic that you had one, so thought I would ask if you could offer any insight.
Click to expand...

I believe that line should be able to be replaced on its own if you can find it. Let me check what I have tomorrow. Light in the shed is burnt out.


Sorry I do not have an abs wire.

Sent from my iPhone using Tapatalk
 
Last edited:
Cameron23

Cameron23

Skid Plates
Founding Member
Location
Kansas
slantyshanty said:
What do you want for the two crossbars, both fuel doors, and (if you have it) the plastic piece that covers the inside hatch (the part that the 1st aid kit would attach to) shipped to 49735?
Click to expand...

any chance you could let me snag that black fuel door? Unless you're replacing your own.
 
caseycamby

caseycamby

Suspension Lift
Location
Marion, NC
Any chance you're willing to seperate the side view mirrors? And if so, do you have the plastic piece that attaches the mirror to the body?
 
M

mac11

Bought an X
Location
Nashville
caseycamby said:
Any chance you're willing to seperate the side view mirrors? And if so, do you have the plastic piece that attaches the mirror to the body?
Click to expand...

Absolutely will sell them separate. Just wanted to put it out there I had duplicates. Not sure what you mean by "the plastic piece that attaches the mirror to the truck" though. The mirror is a single piece. There's a trim piece on the inside of the door you take off that exposes the 3 bolts that attach the mirror to the truck. All 3 mounting bosses are good on both mirrors.
 
caseycamby

caseycamby

Suspension Lift
Location
Marion, NC
mac11 said:
Absolutely will sell them separate. Just wanted to put it out there I had duplicates. Not sure what you mean by "the plastic piece that attaches the mirror to the truck" though. The mirror is a single piece. There's a trim piece on the inside of the door you take off that exposes the 3 bolts that attach the mirror to the truck. All 3 mounting bosses are good on both mirrors.
Click to expand...

I see what you're saying now.. I was talking about this piece.....

81FCC605-C515-45F2-9901-E8F0A743088B_zpsh2l38w0l.jpg


..... but after a closer look at your picture I believe it's there. How much shipped to 28752?


EDIT: Passenger side, btw haha
 
You must log in or register to reply here.
Top