Looking for new Center Pin, U-Bolts And HD Add-a-Leaf

Sturmovik

Bought an X
Hey guys .. so I am adding some extra weight on my truck and I need to add a leaf ( OME-D37XL )
to convert my Old Man Emu CS061R Xterra Leaf Packs to a HD Pack . The Nisstic Lifts has them but shipping is almost $74.. not good..
and I am little upset with them for the past items they send me.. but thats different story.. lol

So my question to you guys.. where I can buy at good price the

Add-a-leaf
U-bolts ( as I would need new longer ones )
Center pin ( as I would need new longer one as well )

because of the new leaf my center pin would be to short so are the u-bolts I wll need to change them where can I get them ?
What could be the options to buy ?

Thank you
 

meisanerd

Need Bigger Tires
Do you have a 4 Wheel Parts near you? That's where I bought the OME leafs for my Yellow, they had the option of order+pickup at the nearby store, so I didn't have to pay shipping.
 

Sturmovik

Bought an X
No unfortunately not... the closest one is 220 miles away .. lol I would spend more on gas that way..
I somewhat found where to get the leafs just trying to figure what size and where to buy u-bolts and center pin
 

Sturmovik

Bought an X
Thats more likely where I will get the AAL and I think one of the members from one forum will sell me u-bolts
just need to find what thickness and size center pin I need now
 

IM1RU

Skid Plates
Supporting Member
Location
SLC, UT
Center bolt....

Buy a 3/8" socket cap bolt (hex key), fine thread and a nylock nut.. They are available in any length you'd need. It fits the leaves and the mounting hole perfectly. Won't strip out, and is many times stronger.

You can find them at nearly any hardware store.
 

Sturmovik

Bought an X
I looked under my truck this morning and my current center bolt is actually still long enough I think to fit AAL so maybe I dont even need center bolt . I will just clean it with PB blaster before I attempt to unbolt it to keep it clean.
310564182_3478165779172749_8798786236850343203_n.jpg
 

TerryD

Total Tease
Supporting Member
Location
Covington, Va
Dude. Center pins are like less than $5/each. Get new ones
I agree with this. I'll reuse u-bolts many times over but if I take a center pin loose, it gets a new one.

Center bolt....

Buy a 3/8" socket cap bolt (hex key), fine thread and a nylock nut.. They are available in any length you'd need. It fits the leaves and the mounting hole perfectly. Won't strip out, and is many times stronger.

You can find them at nearly any hardware store.
I've used the coarse thread ones with good luck as well. Both pairs of bastard packs I ran on my Cherokee used them.
 

Sturmovik

Bought an X
Dude. Center pins are like less than $5/each. Get new ones
I have no problem with that.. but there is non near me.. I checked home deps and lows the 3/8" that they have are only 3 inch long..
and online they are not $5.. unless I am looking at wrong once .. ?
 

JeffPro4x

Hot Pipe
Super Moderator
Supporting Member
Location
Glenside, PA
I have no problem with that.. but there is non near me.. I checked home deps and lows the 3/8" that they have are only 3 inch long..
and online they are not $5.. unless I am looking at wrong once .. ?

 

Sturmovik

Bought an X
Thank you this is not a bad options with shipping comes only $15 not bad.. prob should pick up new nuts too then
 
Top