Looking for a 3"lift kit

Roy Aug 5, 2017

  1. Roy

    Roy Test Drive

    Messages:
    10
    I'm looking for a 3" lift kit for my 04xterra
     
  2. JeffPro4x

    JeffPro4x Hot Pipe Moderator Supporting Member

    Messages:
    8,628
    Location:
    Glenside, PA
    I'm a 2nd gen guy, but I believe your best options are 4x4parts.com or calmini.com
     
  3. JeffPro4x

    JeffPro4x Hot Pipe Moderator Supporting Member

    Messages:
    8,628
    Location:
    Glenside, PA
    Also, welcome to XN. Please feel free to post up in the introduction section and let us know a bit about you and your x.
     
  4. Roy

    Roy Test Drive

    Messages:
    10
    Thanks will do
     
  5. Prime

    Prime Some Kind of In Charge? Admin

    Messages:
    34,401
    Location:
    Denver-ish
    In terms of parts, you need three things.

    Upper control arms for the front, lift shackles and an AAL for the rear. Optionally, and suggested, is to replace the torsion bars with upgraded ones.

    As far as parts sourcing, you have two options. Automotive Customizers (http://www.4x4parts.com) or Calmini (http://www.purenissan.com). Which one? I like the Calmini upper control arms. I feel like they're more stout and a bit over-engineered. Which I like. That said, the shackles and add-a-leaf are better at AC. If you want to upgrade the torsion bars, you can get the Sway-Away bars from either AC or Nisstec (http://www.nissteclifts.com).

    Let me know if you have any other questions.
     

Share This Page