Longtime owner, new to the forum

[Highpowers23]

Hey guys, I've owned my X for quite a few years now and she has plenty of miles (234k) but I thought I'd join as I'd like to be more active in the community. I've done tons of mods to it already but I'm always looking for something else to do. Its a black 2004 XE that I have supercharged, done a poor mans lift, aftermarket bumper (not sure where its from), and many other things. I hope to get many more years of enjoyment out of it.

 

[Fromfrontier2Xterra]

Hey guys, I've owned my X for quite a few years now and she has plenty of miles (234k) but I thought I'd join as I'd like to be more active in the community. I've done tons of mods to it already but I'm always looking for something else to do. Its a black 2004 XE that I have supercharged, done a poor mans lift, aftermarket bumper (not sure where its from), and many other things. I hope to get many more years of enjoyment out of it.

Welcome. Let’s see it!

 

[Prime]

Welcome to XN from Denver!

You say that you supercharged it? Do tell.

 

[harryron]

Welcome

 

[maillet282]

Welcome from usually North of the border. But currently on the road to see family in Florida

 

[JeffPro4x]

Welcome

 

[OL' BLUE]

Welcome ! Grew up in foxboro,mass. Now in va

 

[Highpowers23]

Welcome to XN from Denver!

You say that you supercharged it? Do tell.

I grabbed the stuff off a frontier at my local junkyard. All I ended up using was the lower intake manifolds, supercharger and intake, the pulley bridge, injectors, and I needed a new belt to run everything I also redid a lot of vacuum lines. If I could do it again or find the stuff I would've tried to grab the crank pulley and ac compressor as they take a 6 rib pulley instead of 4 like the NA trucks do. Ive been running it with a 4 rib pulley for almost a year now and was having slipping issues if it was wet out so I made that idler you see out of old parts I had laying around and it hasn't slipped since. The ecu I grabbed didn't like talking to my tcm so I used the NA ecu but put a SAFC in to adjust for the injectors. It makes around 6 psi normally and if its cold enough I've seen it creep past that a little.

Sorry for the wall of text.

 

[Highpowers23]

Also thank you guys for welcoming me!