- Location
- Burtonsville, Md
Does anyone need anything from Odo [2005 S ] before it goes to a recycler ? It need's to be gone before new year's 
2nd Gen - For Sale Junk yard bound !!
- Thread starter TheCrabby1
- Start date
General_Tarfun
Sliders
- Location
- Atlanta, GA
Does anyone need anything from Odo [2005 S ] before it goes to a recycler ? It need's to be gone before new year's
Does anyone need anything from Odo [2005 S ] before it goes to a recycler ? It need's to be gone before new year's
Is everything that comes stock available as well? HVAC controls, etc?
- Location
- Burtonsville, Md
you can take the whole thing away for a very small price. What are you looking for ?
Aren't you 2 wd ? front diff work's. Motor run's . Trans was drove about 300ft in reverse with fluid squirting out of the broken tran cooler . It lost half it's fluid but when we by-passed and topped off it went in-out of every gear on jack stand's . This was a reman put in during spring this year [ $5,500] . Frame is bent need's a whole front clip+hood. Leather seat's [ non-heated] I took off the OME suspension off .
- Location
- Burtonsville, Md
Bring a roll back I'll take a grand..............................................
- Location
- Burtonsville, Md
Anyone ??????????????????????
- Location
- Covington, Va
I wish I could come get it man. Just don't have the time right now.
General_Tarfun
Sliders
- Location
- Atlanta, GA
Same here, I think my girlfriend might actually come after me with a pipe if I take on one more project right now haha. Shame for it to end up in the crusher though.
- Location
- Burtonsville, Md
Jack stand's taken out . One week left ; $800 CASH CAN HAVE IT !!
$1001.01 IF YOUR FROM THAT OTHER SITE .....................................
$1001.01 IF YOUR FROM THAT OTHER SITE .....................................
- Location
- Rochester, NY
Does Odo have the shorty rear headrests? I could use them.
- Location
- Burtonsville, Md
Pm sent.
General_Tarfun
Sliders
- Location
- Atlanta, GA
How much has been removed from it? I'm trying to gauge taking this on as a project X. I'm assuming it's a salvage title at this point?
- Location
- Rochester, NY
You like living on the edge don’t you? Or are you trying to get your gf hooked on the mod monster? Just so she doesn’t kick your butt?
- Location
- Burtonsville, Md
No suspension, I threw old rear shock's on and two bare rim's on the rear to help with dragging it - no rotor's or caliper's since they were new . Frame bent in the front need's a whole front clip/hood . Nope I still have the real title . It's a 4wd S model . Ask any question's !!
General_Tarfun
Sliders
- Location
- Atlanta, GA
Haha you know I love to see how much I can get away with. I have some built up goodwill at the moment because detailed her car, changed the oil and rotated the tires. Can't let that go to waste!
- Location
- Colorado Springs
Driving her car around the block is NOT rotating the tires, despite what you told her.Haha you know I love to see how much I can get away with. I have some built up goodwill at the moment because detailed her car, changed the oil and rotated the tires. Can't let that go to waste!
- Location
- Rochester, NY
But wouldn’t that also constitute an oil change? From in the motor to in the filter and back again?Driving her car around the block is NOT rotating the tires, despite what you told her.
General_Tarfun
Sliders
- Location
- Atlanta, GA
Right? It definitely changed where it was when I started it
. Truthfully, I suffered in that process because I'd forgotten what changing the oil in a sedan is like. I haven't had to jack a car up to do that in 15 years, and don't even get me started on the stupid cartridge oil filter that takes a 32mm socket but is stuck next to the AC lines that don't flex. Ok rant over!This is why I'm glad she doesn't come on here, I can't have my secrets getting out haha.Driving her car around the block is NOT rotating the tires, despite what you told her.