JeffPro4x's Shadow - Now starring 34.7" tires!

JeffPro4x

Hot Pipe
Super Moderator
Supporting Member
Location
Glenside, PA
Small update. Did a bumper swap with Josh at last week's run @ Rausch Creek. Shadow is now rockin a Hefty Tube bumper.
Buttoned up the install today with new fog cubes and reinstalled the winch with new wireless controls.
7900fd6f279ff2f7e71400de299c387f.jpg

7880ec1805869ff7a4b5dc7883804ac7.jpg


sent from a crawlspace...
 

JeffPro4x

Hot Pipe
Super Moderator
Supporting Member
Location
Glenside, PA
I just noticed how clean your headlights are.......I mean.....you won't need them soon.
We talked about this. You have 1st dibs on them. They have some minor scratches, but nothing a polishing kit wouldn't remove.

sent from a crawlspace...
 

JeffPro4x

Hot Pipe
Super Moderator
Supporting Member
Location
Glenside, PA
Had Jay build me a set of HID projectors. Couldn't be more thrilled with how they turned out. Can't wait to drive at night now!
91a622713196bc18b0dbffa51978002f.jpg

5f6fde42e9c86d9ffebb194c55b13881.jpg

1095ec6ae5cad6e45bc6ef18ce6480bb.jpg

a2f1d8fe1bb6e4fa1bba8250a74b0796.jpg


Night shots soon.

sent from a crawlspace...
 

JeffPro4x

Hot Pipe
Super Moderator
Supporting Member
Location
Glenside, PA
So my buddy Jeff had these LCA bolt skid/protectors made up. Finally got around to installing them today. Had to cut a little bit of the hefty rad skid to fit.
pbPzIVb.jpg

dpkM3QB.jpg

UbxzUzG.jpg


Necessary? No. Overkill? Yes. But they were free and I had my rad skid off already, so why not.
 

Attachments

  • IMG_20180210_125635.jpg
    IMG_20180210_125635.jpg
    4.2 MB · Views: 4

JeffPro4x

Hot Pipe
Super Moderator
Supporting Member
Location
Glenside, PA
Everything for titan swap is procured, just waiting on top hats to be made.
In the meantime, have some pics from GPAX's Shocker 11 this past weekend.
iimwg2w.jpg

ANXUFu9.jpg

79Mqvgv.jpg

KhqzYTm.jpg

1aWGT4v.jpg
 

BenMI

Test Drive
Location
Detroit, MI
I know it was a while back when you bedlined your wheels. What kind of prep did you do beforehand? I'm looking at doing wheels, rocker panels, and the plastic step corners on the rear in the near future
 

JeffPro4x

Hot Pipe
Super Moderator
Supporting Member
Location
Glenside, PA
I know it was a while back when you bedlined your wheels. What kind of prep did you do beforehand? I'm looking at doing wheels, rocker panels, and the plastic step corners on the rear in the near future
Really not a whole lot. Hit them with one of those soft sanding blocks to scuff. Wiped them down with denatured alcohol and sprayed. They've held up pretty well.
 

JeffPro4x

Hot Pipe
Super Moderator
Supporting Member
Location
Glenside, PA
OP updated. Titan Swap is 99% done. Just have to get front brake lines. I got 2 sets of rears. Whoops.

R180 spiders looking nice.
IMG_20180505_094519.jpg
The crew:
MVIMG_20180505_084632.jpg
I'm really digging the look
IMG_20180505_152321.jpg IMG_20180505_152304.jpg
 
Top