2nd Gen - For Sale FS: PRG Aluminum Billet Sway Bar Mounts + Urethane Bushings

[ffxcores]

Selling my PRG aluminum billet sway bar mounts and bushings. $130 OBO + shipping.

Installed at 76,450 miles (November 2020) and removed at 80,100 miles (March 2021). Only removed/selling because they are NOT compatible with Shrockworks radiator skid. If you have a different aftermarket skid, double-check. Due to the Shrockworks angle up from behind the sway bar mount there was no room to get a socket on the bolt, so I couldn't tighten the bottom bolts.

Pic from the PRG listing:

 

[outback97]

I don't want to clutter your for sale post so I'll remove this if you'd prefer, but you could possibly modify the Shrockworks rad skid something like this:

Modify Shrockworks Rad Skid For Easier Access / Removal?

I had to pull off my Shrock radiator skid this weekend and I had forgotten how annoying it is to remove. The slots on the front to access the lower sway bar busing bolts are only big enough for an extension. You have to find your shallowest socket, and fish it into place. Then, when you...

www.xterranation.org

 

[ffxcores]

I don't want to clutter your for sale post so I'll remove this if you'd prefer, but you could possibly modify the Shrockworks rad skid something like this:

Modify Shrockworks Rad Skid For Easier Access / Removal?

I had to pull off my Shrock radiator skid this weekend and I had forgotten how annoying it is to remove. The slots on the front to access the lower sway bar busing bolts are only big enough for an extension. You have to find your shallowest socket, and fish it into place. Then, when you...

www.xterranation.org

No worries! I don’t have the tools, patience, or time to do that, but maybe somebody else will.