Firearms post whore thread

maillet282

If you bleeding, Imma fix you
Moderator
Location
Ontario Canada
Well need to go for a drive to ottawa tomorrow. Means i get to stop at Cabelas and pick up a Mossberg Patriot bolt action rifle in 308 with a Vortex scope.

might pick ip a few rounds with that as well.
 

ffxcores

[fully disclosed]
Supporting Member
Location
Virginia
This is the holster I have now: https://shop.roundedgear.com/products/smith-wesson-mpshield-holster

Can anybody recommend a good CC holster that’s comfortable and low profile/less visible?
Finally got around to ordering a new one. Aliengear ShapeShift. Old one didn't have the guard at the top, so I had to tuck in my tshirt when sitting to avoid sweating right on it, and even with fabric there always had a red outline/imprint of it on my back at the end of the day.
 

Xterrorista

Charcoal Briquette
Supporting Member
Location
Denton, TX
I have a ruger GP100 that i love. it was my first gun. not sure what the match champion part is or how its different, but i love that weapon.
[/QUOTELipstick and an internal polish job. A lil smoother. Better, to some, handle and sights.
 

Xterrorista

Charcoal Briquette
Supporting Member
Location
Denton, TX
Ordered new hand cannon. Go tomorrow to finalize back ground check and pick up. Might look at another boom stick.

View attachment 26038
Nice! I loved my Kimber but it was so tight on tolerances that it would get a gritty slide action just from shooting a cpl boxes of ammo thru it. I'd hate to see it in combat conditions, rolling around in sand and mud. Keep it oiled up..
 
Last edited:

Fromfrontier2Xterra

I bought a Taco
Super Moderator
Supporting Member
Location
All over PA
Base gun I ordered over Black Friday special. I don’t really care about anything but the guts. Got a savage axis xp ii with scope for $277 out the door. Reason is, it’s a “starter rifle”. The stock is absolute garbage and flexes. The actual gun itself is solid, accurate, and reliable and this will be the base. I ordered an at-one stock from Boyd’s stocks. This will change out from the crap synthetic stock to wood. Length and cheek riser is adjustable. Stock was $255. Below is the design but not the color. I’m not showing that till I have it together.

7837C5D9-3599-4BB5-B383-231C1B888147.png

so I am now at $512 for a scoped, adjustable long range rifle. Scope will be replaced. Still debating on which one. Will also be changing out bolt arm and sleeve. Scope I’m thinking a vortex but not sure yet.

with the axis II, it already had an adjustable trigger down to 3#. One of the reasons I got it. We’ll see if I replace that or not.
 

Xterrorista

Charcoal Briquette
Supporting Member
Location
Denton, TX
Base gun I ordered over Black Friday special. I don’t really care about anything but the guts. Got a savage axis xp ii with scope for $277 out the door. Reason is, it’s a “starter rifle”. The stock is absolute garbage and flexes. The actual gun itself is solid, accurate, and reliable and this will be the base. I ordered an at-one stock from Boyd’s stocks. This will change out from the crap synthetic stock to wood. Length and cheek riser is adjustable. Stock was $255. Below is the design but not the color. I’m not showing that till I have it together.

View attachment 26101

so I am now at $512 for a scoped, adjustable long range rifle. Scope will be replaced. Still debating on which one. Will also be changing out bolt arm and sleeve. Scope I’m thinking a vortex but not sure yet.

with the axis II, it already had an adjustable trigger down to 3#. One of the reasons I got it. We’ll see if I replace that or not.
Very solid an amazingly affordable. Boyd is one of the best drop-in stocks out there. Before I was through reading I envisioned a Vortex haha. Good luck with the build!
 

Fromfrontier2Xterra

I bought a Taco
Super Moderator
Supporting Member
Location
All over PA
Only put 10 rounds through it. The original bore sighting was pretty accurate. Some minor adjustments made but otherwise, not bad. Did not go for closest groupings or anything. Just getting close to dialed in and will fine tune later. Very happy with it.
 
Top