faulty wheel speed sensor bypass questions

maillet282

If you bleeding, Imma fix you
Moderator
Location
Ontario Canada
Is there a way I can replace the fuse that controlled the ABS in the IDPM to a fused switch to temporarily Gerry rig my truck while I wait for warmer weather to figure out the broken wheel speed sensor. by using somehting similar to this but with 2 wires coming out of the fuse itself
qZiR4bf.jpg


This year has seen some fairly heavy snowfall in my area and having to turn the truck off, switch into 4x4, get out and pull the ABS fuse from the IDPM, start the truck, replace ABS Fuse just to get my truck to shift into 4X4 is starting to get old.

I want to have a switch that will disable the ABS Fuse to speed up the procedure outlined above with out having to do any cutting of wires behind the IDPM

Is this possible. And if so what can I use to attach the wires to the IDPM ABS fuse location ?
 

maillet282

If you bleeding, Imma fix you
Moderator
Location
Ontario Canada
that's what I am thinking. my first idea was to use a 10 amp fuse that was already popped and solder some wires to that but I am thinking about using pins from the connectors I got last summer for my lighting set up. and a bit of heat shrink. to isolate them from each other now just need to find a few minutes to make it up and install it
 
Top