2nd Gen - For Sale SOLD: Bilstein 5100 Front Coilovers with OME HD 2608 springs ($330 shipped)

[ffxcores]

For sale: Bilstein 5100 front coilovers with just over 19,000 miles on them, installed with Old Man Emu HD 2608 lift springs that have less than 500 miles on them. I also have All Dogs Offroad medium duty lift springs in case that's more your style (ADO mediums have just under 19k on them). Top hats have extended studs and need a spacer. 1/4” spacer included.

Update: $330 shipped to lower 48 OBO.
Update 2: SOLD

Located in northern VA but I'll travel and meet in VA, MD, or even part of PA. New price for these assembled coilovers is $600 and new price for the springs is another $200.

 

[TheCrabby1]

If the extended stud's are like the one's Nisstec use's you won't be able to tighten them to the bucket top because the rib's/spline's come thru to far and the thread's don't run down to the top . On mine the spacer is required .

 

[ffxcores]

If the extended stud's are like the one's Nisstec use's you won't be able to tighten them to the bucket top because the rib's/spline's come thru to far and the thread's don't run down to the top . On mine the spacer is required .

Dang it! Just confirmed. I’ll amend the post.

 

[ffxcores]

It looks like shipping isn’t that bad (about $50 all the way to Washington state) so I’m now offering shipping on the assembled coilovers and on the loose coils separately.

 

[ffxcores]

Updated price to include shipping OBO

 

[Stumpgc]

For sale: Bilstein 5100 front coilovers with just over 19,000 miles on them, installed with Old Man Emu HD 2608 lift springs that have less than 500 miles on them. I also have All Dogs Offroad medium duty lift springs in case that's more your style (ADO mediums have just under 19k on them). Top hats have extended studs and need a spacer. 1/4” spacer included.

Update: $330 shipped to lower 48 OBO.

Located in northern VA but I'll travel and meet in VA, MD, or even part of PA. New price for these assembled coilovers is $600 and new price for the springs is another $200.

View attachment 21512View attachment 21513

Did you have any issues with contact with the coil buckets

 

[ffxcores]

Did you have any issues with contact with the coil buckets

None at all. I ended up getting SPC UCAs, but because my brother wrecked one of my stock boots when we swapped them out the first time while trying to keep the joint from spinning. Generally no CBC if you’re only doing 2” of lift, which is what you get from this. (Coilovers alone were like 1.5” and that’s why I added the little spacer.)