ARB multi-port differential breather

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
You talking about the round disc one with two inputs? I've thought about going that route. I've got a shiat ton of air line left over. Arb makes good stuff. Might be a thing.
 

CocoLoco74

Bought an X
Location
Virginia
Yes sir, that's the one. Or perhaps the knock off looks like it uses shark bite tec to attach. It also seems to be geared towards Toyota. Do you think it will be an issue locating the right threads for Nissan differential?
 

TerryD

Total Tease
Supporting Member
Location
Covington, Va
Shouldn't be. It's just a JIS thread instead of a standard pipe thread. You'll have to determine diameter and thread pitch and compare it to a JIS chart. McMaster-Carr usually has good listings for stuff like that.
 

CocoLoco74

Bought an X
Location
Virginia
You talking about the round disc one with two inputs? I've thought about going that route. I've got a shiat ton of air line left over. Arb makes good stuff. Might be a thing.
 

Attachments

  • 20220212_205211.jpg
    20220212_205211.jpg
    3 MB · Views: 20
  • 20220212_205211.jpg
    20220212_205211.jpg
    3 MB · Views: 19

CocoLoco74

Bought an X
Location
Virginia
I was courious about the kit , on amazon for a while and did not see many posts about it. The advantages to this kit are higher mounting location and one breather location for upto 4 different devices. After the purchase can say I am happy with it. For some reason I have felt a difference in drivetrain like it less binding or something; less hesitation. Definitely a mod that I would recommend no matter what brand
 

Sturmovik

Bought an X
maybe its just a mind playing tricks ? lol ))
but I do feel at peace now its a great peace of mind mod as well knowing that it is all good safe and clean in the rear end lol
 

12° North Industries

Bought an X
Site Sponsor
I was curious about the kit , on amazon for a while and did not see many posts about it. The advantages to this kit are higher mounting location and one breather location for up to 4 different devices. After the purchase can say I am happy with it. For some reason I have felt a difference in drive-train like it less binding or something; less hesitation. Definitely a mod that I would recommend no matter what brand

They do work great, the kits addresses use for on both front and rear axles only, there is a second kit of extra line [see below], fittings needed for use on the Transfer Case/Transmissions if you're looking to expand the breather kit.

8mm line vs most other kits using 6mm lines, low profile design, durable, quality materials, and great mounting options for looks that are clean when installed; the internal cartridges are replaceable if needed as well.


Stock (11) ~ https://www.12degnorth.com/product-page/arb-differential-vent-breather-kit
On-Order (3) ~ https://www.12degnorth.com/product-page/arb-differential-breather-extension-kit




~ Elena
 
Top