ABS codes

Huskerguy84

Test Drive
Location
Yuma, AZ
Hi, I have a new one for you guys. If we get this figured out, it will be the last of my dash lights, for now.

2002 Nissan Xterra 4x4 v6 3.3L naturally aspirated. Automatic 205,000 miles

My ABS light is on. In my opinion, the brakes feel and work just fine. No leaks. I did have a transmission oil line leak that sprayed fluid all over the bottom of the vehicle.

The codes are:
C1113 G Sensor
C1108 Front Left Sensor 2
C1111 Pump Motor.

I was wondering where to start?
Thanks
Derek
 
Do you have a reader that will show sensor values? On my second gen, one of the wheel sensors was done, my mechanic buddy hooked up his reader and we could see the one was reading way off from the other 3 (probably the front left in your case).
 

Huskerguy84

Test Drive
Location
Yuma, AZ
Just a little update, I removed the main harness going to the module and discovered that the plug wire coming from the module was damaged. I'm not positive but this is most likely my problem and why 3-4 sensors were throwing codes. I have another module assembly but I do wish I could just replace the module plug to avoid draining the brake fluid and more work.IMG_9228.JPG
 
Top