Like2_4Wheel
Test Drive
- Location
- PEI Canada
I am wondering if any one has run 35" tall tires on stock suspension. I don't mind cuting the body since it is rusty and i am going to do boatsides.
35's with no lift?
- Thread starter Like2_4Wheel
- Start date
- Location
- Denver Adjacent
Anything is possible with enough Sawzall. I'd say to remove the front fenders entirety though. Not sure what you could do about the rear though. The back door is right at the wheel well.
Smileyshaun
Bought an X
Came across this today a 35x10.50r17
Would make the height of a 35 a little easier to squeeze in there , Really contemplating it myself.
Would make the height of a 35 a little easier to squeeze in there , Really contemplating it myself.
Smileyshaun
Bought an X
For the rear you could get a zero rate plate and that would move the axle back a inch but unfortunately because it’s spring under it would lower it a inch to but that can be made back with a shackle lift .
xEndlessfight503x
Bought an X
There is no way. 32x11.5 with no lift is pushing it on my X, and I was not scared to cut, hammer or remove things.