2004 4x4 Thermal Red Revival!

diabetiXtwo

Test Drive
Location
New Jersey
Had this exact truck back in 2005-2008. I sold it right before I got married and right away knew I made I mistake. I've had multiple other trucks, jeeps, etc in between. But it was time to re live my passed.

This is the original 2004.
574455_10151148726023544_2111790060_n.jpg

Here's the "new one" the day I bought it.
271167710_10159633024423544_2571341765934473488_n.jpg

Here is is a couple of weeks later.
271990986_10159658362868544_2790131520534727617_n.jpg

This is after tires, wash, clay, compound, polish, trim restorer, ceramic coating. Also put on a yakima load warrior XL, some lightforce lights, and various other small stuff. I've got a ridiculous amount of work left to do to it. 134,000 miles and drives like new.
 

Attachments

  • 599148_10151468471308544_594474118_n.jpg
    599148_10151468471308544_594474118_n.jpg
    65.9 KB · Views: 1
  • 270949718_10159633024593544_5388453525549858632_n.jpg
    270949718_10159633024593544_5388453525549858632_n.jpg
    76.2 KB · Views: 1
  • day1 2.jpg
    day1 2.jpg
    372.6 KB · Views: 1
  • day1.jpg
    day1.jpg
    187 KB · Views: 1
  • n645418543_170776_1897.jpg
    n645418543_170776_1897.jpg
    82.7 KB · Views: 1

reaver

Lockers Installed
Supporting Member
Location
Caldwell, ID
I thought you might be the same guy from OB, as the name was similar.

Nice to see that you made your way over here as well. ;)
 

diabetiXtwo

Test Drive
Location
New Jersey
Replaced the door and hatch speakers with Rockford Fosgates today. I got cocky and didn't check which was which and did the front first. Then I realized I put the backs in the front and had to go back and take the fronts out. One screw on the driver's door stripped and I eventually had to drill it out. The brackets that were sent by crutchfield also weren't a match for the rear. BUT, it's done and sounds a lot better than the factory paper speakers.

unnamed (1).jpgunnamed (2).jpgunnamed.jpg
 
Top