lift

  1. ffxcores

    Rear Lift Shackles (PRG vs Z1 vs Nisstec)

    I’ve read PRG rear lift shackles are the best and that Nisstec aren’t very good, but I can’t find an actual explanation of what the problem is. Z1 has their own now (https://www.z1offroad.com/z1-products/z1-off-road/nissan-xterra-adjustable-rear-lift-shackles-by-z1-off-road-p-33365.html) and I’m...
  2. tmuniz5

    Body bushings discontinued, can't find anywhere, help!

    Hey everyone, My mechanic is trying to put a 2" lift on my 03 xterra and the front and back body bushings are so messed up he needs me to get new ones before he can continue. He's too busy to find them himself, and I can't find them anywhere since it's discontinued at Nissan. Any help or advice...
  3. wild.coast

    Proper End Link Length With 3" Lift?

    I understand that ideally, the stabilizer bar end eyelet should be parallel with control arm. With a 3" suspension lift (i.e. longer UCA & cranked torsion bars) the Lower Control Arms sit steeper, which means that there is more distance between the LCA and Sway bar - meaning that a longer...
  4. Henry

    Lift Advise Needed

    I am thinking of lifting my 2013X 2.5" in the front and 2 " in the back. Front using a spacer on te strut. back is where I am having questions. 1) Block or Shackles? 2) Which are easier to install? 3) I have seen that both have pros and cons but not really understanding. Help.? 4) Finally if...
  5. Jwelch

    Jwelch's 1st Gen Build Thread - That Escalated Quickly - LS^X

    Current Point of Build -------------------------------- 2002 Gen 1 ---------------- j10 dana 44 with spartan locker and 4.88 gears SUA with OME 2.5 medium duty leafs with some leafs added/removed and a 5" shackle Stock rear h233b with 4.9 gears with a leaf added 15X11 steel wheels with 4" of...
  6. lowtechprime

    1st Gen - For Sale 2004 - Various offroad parts for sale!

    Hello all! I recently sold my 2004 SE :(.. When I bought it, it had what seemed like almost a 6" lift on it. Since I wasn't taking it offroad, and I got tired of not fitting in parking structures, I decided to put it back to stock height. I had to buy new original Rear leaf springs and...
  7. Rhaas

    1st Gen - For Sale Heavy Duty Torsion Bars

    I have a pair of Heavy Duty Torsion Bars for the 1st Gen Xterra for sale. These Torsion Bars come from 4x4 parts and Are in Excellent Condition. They have less than 2000 miles on them and are rust free! They offer a 30% higher Spring Rate over the factory standard. These bars come with dust...
  8. Rhaas

    1st Gen - For Sale Calmini Upper Control Arms For Sale!

    I Have a pair of First Gen Calmini UCAs for sale! They are in Excellent Condition! Comes with Polyurethane Bushings and sleeve also in excellent condition! They do not come with Ball Joints, but these can be purchased from RockAuto for only 20 bucks a piece for the good Moog brand. These UCA...
  9. Rhaas

    List of New Bolts?

    Hello there. So next week me and my friends are getting together to install my 3inch lift. I got new bilstein 5100 shocks, torsion bars, Calmini UCA, Moog ball joints, AAL, shackles, Warn manual Hubs, etc. Now, I remember reading somewhere on here that when doing a suspension lift, it is better...
  10. M

    New Member From Iowa

    Obviously I am a new member here, I have been on looking at tons of threads on this forum the last few days. I have a 2000 Xterra SE 158,000 miles that Ive been working on for awhile its silver don't have pictures up yet it is stock. I've been working on the engine getting rebuild it hydrolocked...
  11. Aqua Mane

    3" SL Setup Questions

    I already have the 1.5" AC shackles and 3" bilstein shocks all the way around for my PML on 31" duratracs. I'm doing the full 3" SL now but not sure which parts to go with.. (not including HD torsion bars which I already ordered) Should I go with this kit with the AAL included and get an idler...
  12. micahgeorge

    Should i get new UCAs

    Im about to do the PML and have rear adjustable shackles but would like to get as much lift in the front as possible. Should I get new UCAs so I have more bump stop clearance? If so what are some good after market ones?
  13. Xado89

    Xado89's K5 Blazer Project

    Hey guys, As some of you may know, I recently acquired a 1981 K5 Blazer for a new project to mildly restore for a DD/Weekend Warrior truck. Sad to say but for terms of obtaining this, my Xterra is currently for sale. I needed something a little bigger and with a little more uhmph behind it in...
  14. D

    DIY Body lift parts

    Who wants to pay 200 or more for a body lift? If you want to run 33" tires and not cut your Xterra up your going to need a 2" BL You can piece together a Bodlylift (BL) for 70.00$ range. You will need 10 - 2" tall 3" wide lift blocks. Zoneoffroad.com (ZON3296) or Ebay is the best place I have...
Top