diy

  1. J

    Oil Pan Reseal

    I’d like to reseal my oil pan because it’s leaking pretty bad however I’m not sure whether or not I buy a gasket or use rtv.
  2. Sturmovik

    DIY Rear Recovery Point

    Hey guys so the other day I made myself a rear recovery point for my truck as it didn't had any.. I cut it out of metal and welded together... I think in the end it came out alright .. I still have extra 3 bolts for 2nd one if I ever want to make one ... but I might hold off on that because I...
  3. David Ramsay

    2.4L Intake Mod

    Hey everyone, I was frustrated with the lack of info on how to mod the intake on a 2.4L. I couldn't seem to find anything on it anywhere, and the big question for me was this: Can I put a conventional CAI kit on this without worrying about the MAF sensor? Interestingly enough, the 2.4L XTerra...
  4. CocoLoco74

    Is there a bearing maker recommended for axle seal rplmt

    so was excited to get new breaks, rotors and suspension, was bummed to find that I think, not only are my dust shields deteriorating, but may have to replace drivers side rear seal. Found liquid over e brake when replacing them. Is there a guide on how to do this, does the universe have to line...
  5. Slapdash Racing

    Diy Headlight Restoration - No More Cataracts!

    This is over on my build thread as well, but thought I'd toss it in here if anyone's interested. No more cataracts! Finally got around to restoring my headlight lenses. Drove at night for the first time in a long time and thought I forgot to turn the lights on. Turns out they just had...
  6. Jwelch

    Custom H233b Rear Disk Brake Conversion

    I know there is a way to convert to disk brakes in the rear by swapping over parts for the early path finders. However this seems to be a lot of work, especially if you don't have the specialized pullers for the bearings, and parts to where you would be getting to the cost of swapping in a more...
  7. Justin Sprecher

    Mo Jalaly Rear Tire Carrier Bumper

    Just downloaded the project files for this bumper here... https://grabcad.com/library/2001-2004-xterra-rear-bumper-tire-carrier and I was wondering if anyone has done the same and built it? I work at a makerspace/pro shop and we could easily cut out the parts needed and I am a proficient...
  8. Taylor Spaulding

    Diy Hybrid Folding And Rollout Awning

    I got inspired by the videos here and here posted on another thread on another site (TNX) I decided to take the best of both worlds and design a roll-up awning with folding legs. Materials: 3 sticks of 1/2" x 10' EMT 1 4" ABS Pipe 10' long 1 4" ABS Cap 1 4" ABS Cleanout 1 8' x 10' Heavy...
  9. Xtigga

    Fo' by Fo'

    New to SUVs and new to Nissan. I purchased this last month from the original owner for $2500. 2001 5 speed 4WD 185,000 miles I moved to Denver from Phoenix and I wanted something a little more capable of inclement weather. I had a couple friends back in P-town who had Xterras. I've always...
  10. TheFauxFox

    How-to: DIY Spark Plug and Intake Plenum Gasket Replacement

    With a lot of forum posts dropping like flies due to Photobucket’s new policies, a new How-to needed to be posted for changing out spark plugs on your newer model Xterra, Frontier, or Pathfinder. Preliminary acknowledgements go to rouguebuck on TNX who had the most complete write-up I found...
  11. Levi_Xterra

    Home built roller drawers

    Trying to get ready for my overland trip to the Grand Canyon this coming summer. Decided to get organized with some roller drawers for the trunk. I refuse to pay several hundred dollars for some professional ones (even though they are nicer) seeing as mine do the job. The box is 30 inches long...
  12. slantyshanty

    Home made bumper

    I realize I will probably get some flame for this but this is the sort of thing I do when I get bored and have some spare parts laying around. That being said, NO I will not pull anything with this bumper. It isn't load bearing and I know it... I already have a rear recovery point that works...
  13. L

    Thoghts on DIY CAI utilizing factory air box

    Thoughts on DIY CAI utilizing factory air box I have been looking at the cost of cold air intakes and have been pondering how to reduce that cost and get a bump in performance. I have been inspired by the two snorkels for Gen 2 X's...
  14. BigWhite

    How to - Graphic wrap installation

    Hey guys I thought I'd do a writeup on my recent decal work. Here is a picture for a quick reference to what I am talking about. As some of you may know there has been some big leaps forward in this type of product making it easier than ever to accomplish this DIY. I got my package from...
  15. AaronsX

    DIY Oil & Oil Filter Change for 1st Gen.

    A very basic and easy job to do and save yourself some money. Sorry if you think this is a bit nooby, but I bet you someone will find it useful :) http://www.youtube.com/watch?v=qmFfYmwhLso&list=UU5zu4qL64gkbkgd8WDUrTHg
Top