1st gen

  1. T

    Wheel fitment

    New to the site. I know it's possibly already been covered but I don't know exactly what to search for such a specific answer. Anyway I'm looking at buying a set of 22" snowflake reps for the x. It looks like most reps are either 9 or 10 wide and offset is 27. They already have 285/45r22 tires...
  2. A

    1st Vs 2nd Gen Inquiry

    What is up Xterra nation? Just joined this site but have been a member within multiple groups on Facebook regarding the X community. Besides that, I have owned my 2004 Supercharged 4x4 since early 2017 and have loved (almost) every minute of it. I do daily it and occasionally hit some medium to...
  3. David Ramsay

    2.4L Intake Mod

    Hey everyone, I was frustrated with the lack of info on how to mod the intake on a 2.4L. I couldn't seem to find anything on it anywhere, and the big question for me was this: Can I put a conventional CAI kit on this without worrying about the MAF sensor? Interestingly enough, the 2.4L XTerra...
  4. Jon Buswell

    Acc Connection Suggestions

    Hi all, I bought a Switch/ fused relay kit to start building out my exterior lighting package. My question is about the ACC cable circled in red in the image below. Does anybody have a suggestion as to where I can connect this, preferably in the engine bay fuse/relay box. I plan on mounting the...
  5. gbakes

    Coastal Offroad Bumpers?

    Anyone have any experience with Coastal Off-road bumpers? They look pretty good for 1st gens and boast a 3-10 day ship time, do they live up to the hype and is it a good bumper for the price or poorly made?
  6. wild.coast

    Wild Coast X Build Thread

    Been on the forum for a while, figured I might as well (finally) post some pics of my X and start this build thread! I'm in British Columbia, Canada. I got the X a couple of years ago and it has been a trusty exploration machine, getting me to some high and remote places. I've been wrenching on...
  7. wild.coast

    1st Gen - Wanted Idler Arm

    Looking for original Nissan idler arm assembly. I actually only need the bracket/pin (the part that mounts to the frame, arm itself slides onto this pin). The new part that Nissan sells (D8530-VK90A) is crap (the pin is way thinner!). I have aftermarket Total Chaos steering that requires the...
  8. Jwelch

    Jwelch's 1st Gen Build Thread - That Escalated Quickly - LS^X

    Current Point of Build -------------------------------- 2002 Gen 1 ---------------- j10 dana 44 with spartan locker and 4.88 gears SUA with OME 2.5 medium duty leafs with some leafs added/removed and a 5" shackle Stock rear h233b with 4.9 gears with a leaf added 15X11 steel wheels with 4" of...
  9. wild.coast

    Transmission Clunk+shake On Cold Start?

    2004 1st gen Xterra, supercharged. My transmission is making an audible clunk and making the whole car shake when switching from P to R, from R to D and back, etc (basically shifting gears while stationary). Only does this when the car is cold (after sitting overnight). After the car is driven...
  10. Travis

    Running boards

    Does anyone know if the running boards off of a 00' x will fit on an 04?
  11. Cameron23

    1st Gen - For Sale FS: CB Setup for 1st or 2nd Gen

    Selling my used CB setup from my 1st Gen that I sold. Not looking to put it into my 2.5 Gen. Worked great the last time I ran it in my 1st Gen. PRICE REDUCED $120 plus shipping Included: 2 Firestik Antennas (1 Black 3ft, and 1 White 4 ft) 1 Firestik Antenna Spring Mount and coax...
  12. TheRenderJunkie

    Engine heating up at 65+

    Hello, (2000 XE ~145 miles, stock with skids) Could adding a full set of shrock-work skids cause over heating to the engine? I've noticed my engine temperature gauge slowing rising while cruising down the highway at speeds 65 + in the last week. If I blast the heat at full it will quickly...
  13. micahgeorge

    Prerunner bar

    Does anyone know where I can get a prerunner bar for my 1st gen X? I know they're out there I just don't know where to get one.
  14. C

    cozyflyer's build -- Cozy

    Cozy's build 2003 Nissan Xterra SE 4x2 Welcome to my somewhat build thread. I haven't done much yet but I would love suggestions and comments. I got my xterra in August of 2013 and have since done simple an inexpensive mods. I would like to do a lot more stuff to it in the future but I am a...
  15. Kris&HerX

    1st Gen Receiver & Cargo Basket

    Nissan Truck Reciever Class III. Fits 2000-04 Nissan Xterra and Frontier. It came off of an '03 Xterra but was never used to haul anything other than my cargo basket. $125.00 OBO+ shipping. Cargo basket - SOLD
Top