Search results

From someone who has been to many of these, with kids, I can assure you it is not too much structure. Also Twin Grove is a great campground for kids! You will spend most of the day cruising the trails with group of similarly capable Xterras, and the pace is usually pretty laid back, with...

Yeah they fit, just don't follow manufacturers recommendations lol. Spacers are for the rear, to match the front closer with width

Also signed up. hopefully all goes as planned!

thats exactly where I had rust, thankfully was able to fix with the sawzall

That's what I did, can get 30 on the highway

Pictures can be very deceiving

Alignment? Whats that? We will see, would like to get them installed this week. How did the washers do? I used them on BMW's with lowered supspension in the past with great results, but the tires were half as tall, so

Not one of the more typical mods, but the stock bushings give up pretty quickly, especially with 35's. There is quite a bit of movement with the stock bushings. I ordered these from PRG. I was a little worried at first, because the sleeve was very loose in the bushings out of the box, but once...

Also Trail 13 @ Rausch Photo credit also @lizardking BUILD: https://www.xterranation.org/index.php?threads/jeffnjm3-xxxterra.8873/

Nice, i cut my fenders similar to yours, you can see on my build page. I trimmed to avoid doing a body lift. Looks good, I'm surprised those tires fit as good as they do!

I know this is a part you don't see changed out too often, so I figured I would post a few pics showing how i did mine. I also recommend replacing the U-joint on the transfer case end of the DS if it wasn't done recently. I developed a real bad rattling noise, which is why I changed the DS CV...

You could try to splice the wires from the m226 sensor with the plug from the c200 sensor, I would try that if i had enough to try

Get the ABS sensors with the donor M226 or be ready to pay out the ass for new ones. And my OG driveshaft bolted right up, the C200 shaft is a few inches longer BTW, but seems either works fine, at least with a lift. Its really a simple swap. Oh and you have to swap in the front r180 with the...

My problem with OEM is they are more than the poly ones. Any reasons not to do the polys?

Ready to put in my 3 set of motormounts. My originals were in there for 80-90k or so, but were completely shot when I replaced them. Replaced them with some aftermarket (eagle or something?) from rock auto, I feel like they gave up after 1-2 wheeling trips. I dont think my engine is really...

Well it came out great! Got it pretty much all together and took it wheeling, here are some pics from brand new in 2005 to now:

Looking good Tom!

I know, i know lol, I promise better pics this weekend. Been painting alot of boring stuff, reassembly, etc

Yup, believe it or not, it goes on smooth with a brush

No, it can be sprayed too, but I rolled it. Bought a 2 gallon kit, used about 1.5 gallons