Welcome from Georgia!
Yeah definitely not bad at all. You probably already know this but a removal tool will make your life much easier on that job, especially with...
That's a good run for a u-joint, I was only able to get about 135k on my factory set.
Well we went hiking up in the Blue Ridge Wilderness area and once we got up into the higher elevations hit an area covered in snow. Shortly after...
I'll shoot you a PM with more details on everything, I also recently bought a loaner cluster for people to use while I work on theirs in case they...
Could be, I suppose it's possible if the gap were large enough you could be hearing the exhaust valves maybe? That gap is a problem regardless, if...
It's all customer preference, when I did my truck I used a grey color to take some of the brightness out of it on everything except for the...
That code means the cat isn't cleaning the exhaust as well as it should be, it might be worth pulling off the truck to inspect for internal damage...
Thanks guys, If you want any help with it just let me know, I’ve been taking a bunch of these on lately due to lack of work thanks to COVID.
So this mod isn't for my own truck since I've already changed all of my interior LED's but a guy out in Texas was having some trouble with his...
I'm not as knowledgeable about the 3.3's, all of my work has been on the 4.0 in my X but I'll try to help as much as I can. If you go here you can...
On the way back down from Ohio with all the camping gear minus the stuff that got destroyed and thrown away I stopped on the scales to get a new...
Welcome!
Must have been! That was the thickest snow I’ve driven through on the highway yet, given I’m from Georgia that’s not saying much but I was really...
Finally went camping again and drove up to Tennessee to stay a couple nights in Cades Cove. A winter storm showed up the first night with wind...
Neither am I, just pointing out that it's the easiest fix if you can't locate the pin. It makes sense a dealer would just replace the harness...
Not sure about that particular pin type but the easiest option would be just getting the harness from a junk yard and wiring it in.
Haven't done too much in the way of mods lately but I did finally replace the passenger side window motor. It was getting so slow that I was...
Sometimes adjusting the alignment can bring the tires a bit forward so they don't rub there but you need a skilled tech willing to take the time...
Welcome! Assuming most of the mechanical stuff is in decent shape I'd start with tires.
Separate names with a comma.